
Single-Position Rubber Goods Test Fixtures for Gloves, Sleeves, Blankets and Sticks
Compact portable fixtures test one item at a time: a chamber for gloves and sleeves, a stand for blankets and a rack for sticks, hoses and hoods. They run from an external AC or DC high-voltage source and test to ASTM, IEC and OSHA standards.
- Configuration
- chamber for gloves and sleeves, blanket stand, rack for sticks, hoses and hoods
- Power supply
- external high-voltage source, AC or DC
- Compatible test sets
- AC Hipot 6CP, 6CB50/10-3, BK130/36
- Glove and sleeve classes
- 00 to 4
Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.
Description
Single-position fixtures are used for electrical testing of the rubber personal protective equipment that utility workers rely on: gloves, sleeves, blankets, overshoes and boots, hoses, hoods and switch sticks. Each item is tested at a voltage above its maximum working level, so the operator can confirm that it will withstand the electrical stress it meets in service. The stands measure breakdown voltage and leakage current. Because the units are compact and portable, only one item is tested on a given stand at a time.
The glove and sleeve chamber takes products from class 00 up to class 4 under the current editions of ASTM, IEC and OSHA standards. Its body is made from 12 gauge cold-rolled steel, primed and finished with two coats of urethane paint, and it has a hinged front door with an acrylic window and a polyethylene water tank on wheels. Sleeves are tested by the direct method, where a dielectric liquid at the bottom of the tank forms the cuff seal. Door interlocks cut the output voltage if anyone tries to open the door during a test, and the tank and cabinet are earthed once the voltage is removed. An extraction fan draws clean air across the water surface and removes ozone. The chamber measures 1397 x 889 x 1930 mm and weighs 231 kg.
The blanket stand suits several classes of rubber blanket. Its high-voltage and return terminals connect the source to blankets up to 1168 mm wide or long, and the stand complies with ASTM-F479 for both new and in-service blankets. The electrical-grade fibreglass body folds down to 1372 x 610 x 279 mm and has handles for carrying, and everything except the electrodes stays inside when folded. The bottom electrode sits on the floor and the top one in the lid, and the electrodes can be swapped for other sizes and classes. The stand weighs 37 kg and includes a case earthing function and protective disconnectors.
The stands run from external high-voltage test sets, the AC Hipot 6CP, 6CB50/10-3 or BK130/36, so the fixture has no source of its own. A start interlock prevents a test from beginning at anything other than zero output, and indicator lamps show a breakdown. After any breakdown the operator resets the set before testing continues.
Technical specifications
| Configuration | chamber for gloves and sleeves, blanket stand, rack for sticks, hoses and hoods |
|---|---|
| Power supply | external high-voltage source, AC or DC |
| Compatible test sets | AC Hipot 6CP, 6CB50/10-3, BK130/36 |
| Glove and sleeve classes | 00 to 4 |
| Standards | ASTM, IEC, OSHA; ASTM-F479 for blankets |
| Glove chamber, dimensions | 1397 x 889 x 1930 mm |
| Glove chamber, weight | 231 kg |
| Glove chamber, construction | 12 gauge cold-rolled steel, urethane paint, acrylic window, polyethylene water tank |
| Blankets, maximum size | up to 1168 mm |
| Blanket stand, folded dimensions | 1372 x 610 x 279 mm |
| Blanket stand, weight | 37 kg |
| Blanket stand, construction | electrical-grade fibreglass |
| Safety | door interlocks, earthing, no-zero start interlock, breakdown indicator lamps |
Request a price and lead time
Single-Position Rubber Goods Test Fixtures for Gloves, Sleeves, Blankets and Sticks. We reply within one business day.
Or email sales@usk.ua or call 044 339-50-20.
Questions and answers
Does the fixture have its own high-voltage source?
No. The stands are powered by external AC Hipot 6CP, 6CB50/10-3 or BK130/36 test sets.
Which glove classes can be tested in the chamber?
Gloves and sleeves of classes 00 to 4 under ASTM, IEC and OSHA.
How are sleeves tested?
By the direct method, where a dielectric liquid at the bottom of the tank forms the cuff seal.
Similar equipment from other manufacturers






