International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

RCTD Compensating Reactor for TD 5000 Tan Delta Testing of Rotating Machines

The RCTD complements the TD 5000 when tan delta is measured on the insulation of rotating machines. It compensates the capacitive load, raises the test current and allows the maximum test voltage to be reached on high-capacitance objects.

Type
compensating reactor
Application
tan delta measurement on rotating machines with TD 5000
Contents
two inductor coils
Nominal inductance per coil
40 H

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

The RCTD is a compensating reactor that works alongside the TD 5000 when the dissipation factor (tan delta) of insulation in rotating machines is measured. Generator and motor windings present a large capacitance, and without compensation the test source cannot raise the voltage to the required level. The reactor offsets this capacitive part of the load, so a higher test current can be drawn and the full test voltage becomes reachable on high-capacitance objects.

Each unit contains two inductor coils rated at 40 H. The unit carries a steady current of 0.4 A, and each inductor can take up to 1 A for more than 10 s, which covers the duration of a typical measurement. The coils are connected in parallel with the load under test.

Two units can be joined in parallel for larger objects, which gives three or four coils with a combined rating of 2 x 80 H. The number of coils in circuit is chosen to suit the capacitance of the winding being tested. The TD 5000 is an optional module for capacitance and tan delta measurement within the STS 5000 multifunction test system, which supplies up to 12 kV.

The reactor is supplied in a transport case, while the connection kit is a separate item with its own order code. Both codes, 47175 and 48175, are listed in the specification table.

Technical specifications

Typecompensating reactor
Applicationtan delta measurement on rotating machines with TD 5000
Contentstwo inductor coils
Nominal inductance per coil40 H
Steady current0.4 A
Maximum current per coil1 A
Duration at maximum currentmore than 10 s
Two RCTD units in parallelthree or four coils, 2 x 80 H
CompatibilityTD 5000 (STS 5000 module, up to 12 kV)
47175RCTD in a transport case
48175connection kit for the RCTD

Part numbers

Show all part numbers (3)

RCTD, 47175, 48175

Request a price and lead time

RCTD Compensating Reactor for TD 5000 Tan Delta Testing of Rotating Machines. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

Why is an RCTD needed when measuring tan delta on generators?

It offsets the large winding capacitance, raises the test current and lets the TD 5000 reach its maximum test voltage.

What are the coil ratings?

Two 40 H inductors, a steady current of 0.4 A, and up to 1 A per inductor for more than 10 s.

Can several reactors be combined?

Yes. Two RCTD units can be connected in parallel to give three or four coils with a combined rating of 2 x 80 H.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides