International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

PMT-1 Pick Method Tester for Metallic-Sheathed Cable Fault Location

The PMT-1 is made for cables with a metallic sheath, where it helps establish the fault zone and pinpoint the exact spot of a high-voltage breakdown. It reads the sheath current in both magnitude and polarity and runs without any power supply.

Type
Pick method tester for fault location
Used with
cables with a metallic sheath
Functions
fault zone determination, precise location of high-voltage faults
Measurement
sheath current, magnitude and polarity

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

The tester is used on cable networks where power cables carry a metallic sheath. Crews rely on it to mark out the zone in which a fault lies, and then to home in on the exact point of a breakdown on high-voltage lines. It also helps to identify one cable among several laid side by side along the same route.

The method rests on measuring the current that flows along the metallic sheath. The PMT-1 displays both the size of that current and its direction. By comparing readings taken at different points along the route, the operator can tell which side of the measuring point the fault sits and narrow the search section by section.

Because the unit is passive, nothing needs charging or replacing before a trip to the field, and no separate power source has to be carried down into manholes, tunnels or cable chambers. The readout is very sensitive, so even small sheath currents are easy to see while a fault is being searched for or a cable is being traced.

The body is light and easy to carry, and the connecting lead is kept stored inside the case, so the tester moves quickly between access points. It is intended for teams that maintain underground cable networks and substation cable entries, and it works alongside other fault-finding equipment on the route. Confirming the position before any excavation starts is one of its main advantages.

Technical specifications

TypePick method tester for fault location
Used withcables with a metallic sheath
Functionsfault zone determination, precise location of high-voltage faults
Measurementsheath current, magnitude and polarity
Powernot required, passive design
Readout sensitivityvery high, for fault finding and cable identification
Constructionlight, portable
Cable storageinside the case

Part numbers

Show all part numbers (1)

PMT-1

Request a price and lead time

PMT-1 Pick Method Tester for Metallic-Sheathed Cable Fault Location. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

Does the PMT-1 need batteries or another power supply?

No. The tester has a passive design and works without any power supply.

Which sheath parameters does the tester display?

It shows both the magnitude and the polarity of the current flowing in the metallic sheath of the cable.

What kind of cables is the tester intended for?

It is intended for power cables with a metallic sheath, including high-voltage cables in underground networks.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides