International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

PD Simulator portable partial discharge simulator for training and demonstration

The PD Simulator reproduces corona, surface and internal partial discharges in real time. A built-in HFCT sensor and a high frequency noise generator let personnel train on PD instruments.

Type
portable partial discharge simulator
Discharge types
corona, surface, internal
Test voltage
0–4500 VAC
Noise simulation
high frequency noise generator (ON/OFF)

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

The PD Simulator is a portable training device that demonstrates the typical partial discharge phenomena found in MV and HV electrical equipment. Corona, surface discharges and internal discharges can each be shown. The unit serves for personnel training, regular refresher sessions, and for checking measuring instruments before they go out to site.

Three test samples are built in, one for each defect type. They can be switched on individually or together, which produces a complex picture with several discharge sources and lets trainees practise separating them. The test voltage applied to the samples is adjustable from 0 to 4500 VAC.

An internal high frequency noise generator can be switched on and off. It imitates interference found on real sites, which brings training closer to field conditions and allows signal filtering to be practised with the T/F map.

The discharge signal is taken from a built-in 30 mm HFCT sensor with a BNC output. A portable PD analyser or any other PD measuring instrument can be connected to it. Synchronisation with the voltage phase is provided automatically by a built-in 220/20 VAC transformer at 50/60 Hz, so no separate synchronisation leads are needed.

Discharges are reproduced in real time, so the instructor can change the samples and noise settings during a lesson while trainees watch the effect on the instrument screen. The unit runs from 220/110 VAC at 50/60 Hz and measures 480x210x430 mm with a weight of 15 kg, so it is best set up on a bench in a classroom or laboratory.

Technical specifications

Typeportable partial discharge simulator
Discharge typescorona, surface, internal
Test voltage0–4500 VAC
Noise simulationhigh frequency noise generator (ON/OFF)
Built-in PD sensorHFCT (30 mm)
Synchronisation50/60 Hz, 220/20 VAC transformer
ConnectorBNC
Power supply220/110 VAC 50/60 Hz
Weight15 kg
Dimensions480x210x430 mm

Request a price and lead time

PD Simulator portable partial discharge simulator for training and demonstration. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

Can a different PD instrument be connected to the simulator?

Yes, the built-in HFCT sensor with its BNC output connects to any PD measuring instrument.

Which types of discharge does the PD Simulator reproduce?

Corona, surface and internal discharges, each from its own sample, switched on separately or together.

What is the noise generator for?

It imitates high frequency interference found on real sites and lets trainees practise signal filtering with the T/F map.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides