
F6150e power system simulator for protection relay testing, up to 12 sources
The F6150e is a power system simulator from the F6 range for testing relays, protection schemes and class 0.2 current transformers. It houses up to 12 high-level analogue sources, 8 logic inputs and 4 fast FET outputs in one enclosure weighing 19.05 kg.
- Voltage sources
- 6
- Current sources
- 6
- Low-level sources
- 12
- AC voltage sources
- 6 x 150 V @ 75 VA; 3 x 300 V @ 150 VA; 1 x 600 V @ 300 VA
Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.
Description
The F6150e is used in substations, protection relay laboratories and test benches. It calibrates and checks microprocessor, electronic and electromechanical relays with a high burden, and performs analogue tests of protection devices at 1 A and 5 A. It also simulates power system states and transients, and is used to check class 0.2 measuring current transformers, converters and energy meters.
The unit has up to 12 sources: six voltage sources and six current sources, which can be configured for bench tests and for checking complex protection schemes. Voltage sources operate in the configurations 6 x 150 V @ 75 VA, 3 x 300 V @ 150 VA and 1 x 600 V @ 300 VA, and on DC at 3 x 424 V @ 150 W, across ranges of 75 V, 150 V and 300 V. Full power is delivered into resistive, inductive and capacitive loads at a maximum current of 6 x 35 A, 3 x 70 A or 1 x 210 A.
Four versions are offered. The F6150e (Premier) has 12 high-level analogue sources and six AC/DC amplifiers, three of 150 VA for voltage and three of 150/225 VA for current. The F6150e-D is designed for digital three-phase distribution systems, with eight sources and four amplifiers. The F6150e-SP suits single-phase relays with four sources and two amplifiers. The F6150e-IRC works with 12 low-level analogue sources to check intelligent reclosers and other devices with low-level inputs.
Time synchronisation by GPS is provided for end-to-end tests of protection schemes that use communication channels. The front panel shows the amplitudes and phases of the active voltage and current sources during a test. Basic manual checks can be run from a tablet, each source can be set from a PC, and Wi-Fi is available as an option. A built-in battery simulator delivers 6 to 300 V DC.
The unit runs on 105–264 V, 47–63 Hz and draws up to 2600 W at full power. It measures 38 x 24 x 45.7 cm and has a Type 1 / IP20 enclosure. It meets EN 61010-1 and UL 61010-1, with CSA 27.2 # 61010-1, plus IEC 60068-2-27 and IEC 60068-2-6 for shock and vibration, and ANSI/IEEE c37.90. Production is certified to ISO/IEC 17025 and ISO 17034, and to ISO 9001.
Technical specifications
| Voltage sources | 6 |
|---|---|
| Current sources | 6 |
| Low-level sources | 12 |
| AC voltage sources | 6 x 150 V @ 75 VA; 3 x 300 V @ 150 VA; 1 x 600 V @ 300 VA |
| DC voltage sources | 3 x 424 V @ 150 W |
| Maximum current | 6 x 35, 3 x 70, 1 x 210 A |
| Logic inputs | 8 external analogue or digital signals |
| Logic outputs | 4 FET (fast electronic relays) |
| Battery simulator | 6 – 300 V DC |
| Supply | 105–264 V, 47–63 Hz |
| Full-power consumption | 2600 W |
| Weight | 19.05 kg |
| Dimensions | 38 x 24 x 45.7 cm |
| Enclosure class | Type 1 / IP20 |
| Safety | EN 61010-1 and UL 61010-1, with CSA 27.2 # 61010-1 |
Part numbers
Show all part numbers (3)
F6150e, F6150e-D, F6150e-SP and F6150e-IRC
Request a price and lead time
F6150e power system simulator for protection relay testing, up to 12 sources. We reply within one business day.
Or email sales@usk.ua or call 044 339-50-20.
Questions and answers
Which F6150e versions are available?
F6150e with 12 high-level sources, F6150e-D with 8 sources for three-phase distribution systems, F6150e-SP with 4 sources for single-phase relays, and F6150e-IRC with 12 low-level sources.
What is the maximum output current?
Full power is delivered at currents of 6 x 35 A, 3 x 70 A or 1 x 210 A into resistive, inductive and capacitive loads.
Is the F6150e suitable for testing current transformers?
Yes, it checks class 0.2 measuring current transformers, converters and energy meters.
Similar equipment from other manufacturers






