
AUTO-OHM 10 Compact 10 A Micro-Ohmmeter, Mains or Battery Powered
A 10 A ohmmeter with four lithium-ion batteries for measuring low resistances at breaker contacts, bushing joints and welded joints. It also has a mode for transformer winding resistance and runs up to 2900 measurements on one charge.
- Type
- micro-ohmmeter for low resistance, DC
- Maximum current
- 10 A
- Test currents
- 1 mA, 10 mA, 100 mA, 1 A, 5 A, 10 A
- Range (contact resistance)
- 1 µΩ to 5000 Ω
Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.
Description
AUTO-OHM 10 is used to measure low resistances: the contacts of power circuit breakers, bushing contact joints, welded joints and the winding resistance of transformers. The measurement mode is selected with a rotary switch, either contact resistance or transformer resistance. Results are shown in micro-ohms, milli-ohms or ohms on a backlit 128 x 64 pixel LCD that is readable in sunlight and in low light.
The unit runs from four protected 3.7 V lithium-ion batteries of 3400 mAh each. One charge is enough for up to 2900 measurements at 10 A with a 2 s duration. The batteries take 4 hours to charge, and mains power at 100 to 240 V, 50/60 Hz allows continuous operation. Auto power down can be set to 30 seconds, 1 minute or 3 minutes.
In contact resistance mode the range runs from 1 µΩ to 5000 Ω. The operator selects one of six test currents (1 mA, 10 mA, 100 mA, 1 A, 5 A or 10 A) and one of six durations (1, 2, 3, 5, 10 or 60 seconds). Up to three tests can be preset and each started with one press. At 10 A the resolution is 0.1 µΩ up to 999.9 µΩ, with accuracy of ±0.2% ±0.2 µΩ, and the upper limit at 10 A is 250.00 mΩ. A bidirectional mode applies current in both directions and reports the average value.
The measuring inputs are protected up to 600 V. The unit measures 36 x 19.4 x 30.4 cm and weighs 3.54 kg, with an IP67 housing. Operating temperature is -10 to +50 °C, storage -30 to +70 °C, and humidity up to 90% at 40 °C without condensation, at altitudes up to 2000 m. Its safety compliance is listed in the specification table.
The base kit includes 4.57 m cables with alligator clamps, a mains cable and a bag. Options are 9.14 m cables, 3 m hand probes rated for 5 A and 10 A, a 10 A pistol grip probe and a transport case. The circuit breaker must be switched off and fully isolated before any measurement is made.
Technical specifications
| Type | micro-ohmmeter for low resistance, DC |
|---|---|
| Maximum current | 10 A |
| Test currents | 1 mA, 10 mA, 100 mA, 1 A, 5 A, 10 A |
| Range (contact resistance) | 1 µΩ to 5000 Ω |
| Resolution at 10 A | 0.1 µΩ (up to 999.9 µΩ) |
| Accuracy at 10 A | ±0.2% ±0.2 µΩ |
| Test duration | 1, 2, 3, 5, 10, 60 s |
| Modes | contact resistance, transformer winding resistance, bidirectional |
| Batteries | Li-Ion 3.7 V, 3400 mAh, four pieces |
| Charge capacity | up to 2900 measurements (10 A, 2 s) |
| Charging time | 4 h |
| Mains power | 100 to 240 V, 50/60 Hz |
| Input protection | up to 600 V |
| Display | backlit LCD, 128 x 64 pixels |
| Operating temperature | -10 to +50 °C |
| Ingress protection | IP67 |
| Dimensions | 36 by 19.4 by 30.4 cm |
| Weight | 3.54 kg |
| Safety | CSA-C22.2, UL 61010-a, IEC 61010 (1995) |
Part numbers
Show all part numbers (6)
9131-UC, 9131-SC, 8000-0231, 8000-0233, 8000-0225, 8000-0226
Request a price and lead time
AUTO-OHM 10 Compact 10 A Micro-Ohmmeter, Mains or Battery Powered. We reply within one business day.
Or email sales@usk.ua or call 044 339-50-20.
Questions and answers
How many measurements can be made on one charge?
Up to 2900 measurements at 10 A with a 2 s duration, and on mains power the unit runs continuously.
Can the unit measure transformer winding resistance?
Yes, a separate transformer resistance mode is selected with the rotary switch.
Which optional probes are available?
3 m hand probes for 5 A and 10 A, a 10 A pistol grip probe and 9.14 m cables.
Similar equipment from other manufacturers






