
8TC variable inductance resonant test systems in steel tanks, 250–500 kV
Large variable inductance resonant systems of the 8TC series, with the reactor in an earthed steel tank, for AC testing of power cables at 250 to 500 kV. Eight models rated at 250, 350, 400 and 500 kV with 5000 to 14000 kVA, each with several voltage taps.
- Maximum voltage
- 250 / 350 / 400 / 500 kV
- Taps
- 100 to 500 kV, up to four per model
- Power
- 5000 / 7000 / 11000 / 14000 kVA
- Load capacitance 8TC250-5000, 50 Hz
- 255 / 707 / 1590 nF
Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.
Description
The 8TC series is used where the load is mainly capacitive with very small active losses, above all for testing power cables. It also serves GIS, capacitors, generator windings and dry testing of insulators. The system can be combined with partial discharge and loss tangent measurement.
Resonance occurs when the total inductive reactance equals the capacitive reactance of the load. In this design the circuit needs no extra reactive power from the supply, and the excitation winding covers only the losses in the windings and core. The ratio of reactive to active power defines the quality factor Q. The system operates in both parallel and series resonance modes, and several output taps widen the tuning range.
The reactor sits in an earthed steel dead tank, so the housing is not at potential. Dimensions and weights are typical for standard units and may change for custom systems.
The range includes eight models. The 8TC250-5000 has taps at 250, 150 and 100 kV, is rated 5000 kVA and measures 5.2 × 3.3 × 3.5 m, weighing 22.5 t. The 8TC350-7000 has taps at 350, 230, 150 and 100 kV, is rated 7000 kVA, measures 6.9 × 3.1 × 3.3 m and weighs 28.5 t. The 8TC350-11000 and 8TC350-14000 are rated 11000 and 14000 kVA and weigh 36.5 t and 38.5 t. The 8TC400-11000 and 8TC400-14000 cover 400 kV at the same ratings, weighing 38.5 t and 40.5 t. The 8TC500-11000 has taps at 500, 350, 230 and 150 kV and weighs 67.0 t, while the 8TC500-14000 is rated 14000 kVA, measures 10.2 × 5.1 × 5.5 m and weighs 70.5 t. Some lower taps are current-limited.
Capacitance depends on the tap and the frequency. At 50 Hz the 8TC250-5000 works with 255, 707 and 1590 nF on its 250, 150 and 100 kV taps, and with 210, 590 and 1325 nF at 60 Hz. The 8TC500-14000 takes 175 nF on its 500 kV tap and 1590 nF on the 150 kV tap at 50 Hz. Divider capacitance is not included in these figures. Every model runs 1 hour on and 1 hour off, six cycles per day, and the systems comply with IEC 60060-1 and IEEE 4.
Technical specifications
| Maximum voltage | 250 / 350 / 400 / 500 kV |
|---|---|
| Taps | 100 to 500 kV, up to four per model |
| Power | 5000 / 7000 / 11000 / 14000 kVA |
| Load capacitance 8TC250-5000, 50 Hz | 255 / 707 / 1590 nF |
| Load capacitance 8TC500-14000, 50 Hz | 175 / 365 / 840 / 1590 nF |
| Maximum load capacitance | 2385 nF (100 kV tap, 50 Hz) |
| Dimensions | from 5.2 × 3.3 × 3.5 m to 10.2 × 5.1 × 5.5 m |
| Weight | 22.5 – 70.5 t |
| Duty cycle | 1 h on / 1 h off, six cycles per day |
| Resonance modes | parallel and series |
| Construction | earthed steel tank |
| Standards | IEC 60060-1, IEEE 4 |
Part numbers
Show all part numbers (8)
8TC500-14000, 8TC500-11000, 8TC400-14000, 8TC400-11000, 8TC350-14000, 8TC350-11000, 8TC350-7000, 8TC250-5000
Request a price and lead time
8TC variable inductance resonant test systems in steel tanks, 250–500 kV. We reply within one business day.
Or email sales@usk.ua or call 044 339-50-20.
Questions and answers
What cable capacitance can be tested?
On the 100 kV tap, the 8TC350-11000, 8TC350-14000, 8TC400-11000 and 8TC400-14000 work with up to 2385 nF at 50 Hz. On the 500 kV tap the 8TC500 models take 140 to 175 nF.
How do the 8TC350-11000 and 8TC350-14000 differ?
They differ in power, 11000 and 14000 kVA, in capacitance on the upper taps, and in weight, 36.5 t against 38.5 t. In the 8TC350-14000 the 150 kV and 100 kV taps are current-limited.
What duty cycle does the system allow?
All models run at 1 hour on and 1 hour off, six cycles per day.
Similar equipment from other manufacturers






