International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

SDC 095-008-W-920-00 Capacitor Bushing, Wall or Floor, 13.8 kV, 800 A, 95 kV BIL

The SDC bushing, part number 095-008-W-920-00, carries a conductor through a wall or floor with air on both sides. It is rated 13.8 kV and 800 A with a 95 kV BIL, has a creepage distance of 13.8 in outside, and its terminal is bottom connected with a 1 in ground shield.

Type
Solid dielectric capacitor bushing, wall or floor
Voltage class
13.8 kV
Rated current
800 A
BIL
95 kV

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

SDC series bushings (solid dielectric capacitor) are supplied both as new products for equipment manufacturers and as replacements of the same dimensions and connections. They suit power transformers, generator step-up transformers, oil circuit breakers, switchgear, wall and floor passages (air-to-air and oil-to-oil) and HVDC installations. The series covers voltages from 1 to 170 kV and currents up to 21500 A.

The body is a solid insulating mass of APG-02 cycloaliphatic epoxy compound, with ribs cast in one piece with it. The insulation is solid, with no oil, paper or porcelain. Inside are a capacitance graded core, a pocket for a current transformer with a ground shield, and a test tap on the flange. The series is made with bottom connection or with a draw-through conductor, and this item has a bottom connection.

Version 095-008-W-920-00 is for wall or floor use with air above and below the flange, rated 13.8 kV, 800 A and 95 kV BIL, with a 60 Hz dry withstand voltage of 34 kV. The minimum creepage distance is 13.8 in outside and 8.1 in inside, and the minimum strike distance is 6.9 in and 7.3 in respectively. The ground shield length is 1 in.

The aluminium flange has four 0.88 in holes on a 7.25 in bolt circle, and its outside diameter is 8.5 in. The top and bottom terminals are type 1-14 with silver plating, the rod diameter is 1.25 in and the effective terminal length is 2 in. The overall length is 22.6 in, with 11.91 in above the flange and 10.69 in below it, and the weight is 20 lb. The bushing can be installed in any position from vertical to horizontal, and it is made to IEEE C57.19.01, CSA C88.1 and IEC 60137. A test tap on the flange is used to check capacitance and dissipation factor during periodic tests.

Technical specifications

TypeSolid dielectric capacitor bushing, wall or floor
Voltage class13.8 kV
Rated current800 A
BIL95 kV
Dry withstand voltage, 60 Hz34 kV
Medium above / below flangeAir / air
Creepage distance, outside / inside13.8 in / 8.1 in
Strike distance, outside / inside6.9 in / 7.3 in
Ground shield1 in
InsulationAPG-02, cycloaliphatic epoxy
FlangeAluminium, 4 holes of 0.88 in on 7.25 in bolt circle
Terminals1-14, silver plated
Rod diameter1.25 in
Overall length22.6 in
Mounting positionVertical to horizontal
Test tapYes
Weight20 lb
StandardsIEEE C57.19.01, CSA C88.1, IEC 60137

Part numbers

Show all part numbers (1)

095-008-W-920-00

Request a price and lead time

SDC 095-008-W-920-00 Capacitor Bushing, Wall or Floor, 13.8 kV, 800 A, 95 kV BIL. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

Can the bushing be installed horizontally?

Yes, the permitted mounting position runs from vertical to horizontal.

Does the bushing contain oil?

No, the insulation is solid APG-02 epoxy, with no oil, paper or porcelain.

Which environment is this item designed for?

For wall or floor passages with air above and below the flange. The series also includes oil-to-oil versions.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides