
Kühtreiber PT 60 plasma cutting torch, 60 A, air-cooled, 6 m
The Kühtreiber PT 60 is an air-cooled plasma torch matched to the MAKin CUT 40 PILOT, MAKin CUT 40 HF and MAKin CUT 65 PILOT cutting units. Its highest current is 60 A at a 60 % duty cycle and its length is 6 m.
- Brand
- Kühtreiber
- Type
- plasma torch
- Maximum current
- 60 A (at 60 % duty cycle)
- Cooling
- air
Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.
Description
One Kühtreiber PT 60 torch fits all three of the maker's plasma cutters named for it: the MAKin CUT 40 PILOT, the CUT 40 HF and the CUT 65 PILOT. Workshops running several of these power sources can therefore keep identical spare torches and move them between stations. Typical uses are a replacement for a worn torch, a reserve held in stock, or a fitting for a unit that lacks one.
Maximum current is 60 A at a 60 % duty cycle. Near that rating the torch works with rest periods, so set long cutting runs with the duty figure in mind. If the torch is fitted to a power source with a higher rating, cutting current must be limited to the value the manufacturer gives for the torch.
Cooling is by air, and no liquid cooling block, pump or coolant hose is required. The set-up is therefore just the power source, the torch and a gas supply. That keeps servicing simple for shop cutting of sheet metal, repair work and installation jobs where the unit is carried between sites.
Gas pressure is specified at 4.4 - 5.0 bar and should be adjusted and monitored before work begins, holding it within that range. The 6 m length lets you cut at a distance from the power source without dragging it along the workpiece.
The manufacturer's order number is 068710072. A second torch with the same current, the PT 60 AIR, exists in the same range for a different machine, so quote both the part number and your power source model when you enquire.
Technical specifications
| Brand | Kühtreiber |
|---|---|
| Type | plasma torch |
| Maximum current | 60 A (at 60 % duty cycle) |
| Cooling | air |
| Gas pressure | 4.4 - 5.0 bar |
| Length | 6 m |
| Compatible machines | MAKin CUT 40 PILOT, CUT 40 HF, CUT 65 PILOT |
| Country of manufacture | Czech Republic |
Part numbers
Show all part numbers (1)
068710072
Request a price and lead time
Kühtreiber PT 60 plasma cutting torch, 60 A, air-cooled, 6 m. We reply within one business day.
Or email sales@usk.ua or call 044 339-50-20.
Questions and answers
Which machines is the PT 60 built for?
The manufacturer names the Kühtreiber MAKin CUT 40 PILOT, CUT 40 HF and CUT 65 PILOT plasma cutters.
What current and duty cycle does the PT 60 have?
The highest current is 60 A at a 60 % duty cycle.
How is the PT 60 cooled?
Cooling is by air, no liquid unit is required, and the working gas pressure is 4.4 - 5.0 bar.
Similar equipment from other manufacturers






