International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

ALFA IN PEGAS 101 PLASMA inverter for plasma cutting up to 40 mm

The ALFA IN PEGAS 101 PLASMA is an IGBT PFC inverter plasma cutter for manual cutting of carbon steel. It gives a clean cut up to 40 mm, productive cutting up to 25 mm and separation of metal up to 50 mm, and it is aimed at heavy engineering and workshop production.

Brand
ALFA IN
Country of manufacture
Czech Republic
Type
plasma cutting power source for manual use
Inverter
IGBT PFC

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

The PEGAS 101 PLASMA, article 5.0281.1, is the manual version in the ALFA IN range. It comes with the SVH-105 hand torch, the 7112 starter set (SVH-105, 85-105A) and a 6.7 m coaxial cable, and an earthing cable with its clamp is included. A separate machine version, the PEGAS 101 PLASMA CNC, exists for gantry tables, and the manufacturer also lists a set-up with the SCP 120 torch.

The manufacturer gives three thickness limits for carbon steel. A high-quality cut is obtained up to 40 mm, productive cutting at normal speed goes up to 25 mm, and where lower edge quality is acceptable the unit will cut through and separate metal up to 50 mm. Plasma cutting offers high speed, a narrow heat-affected zone and smaller thermal distortion of the workpiece. Carbon, high-alloy and stainless steels and non-ferrous metals can all be cut, and no special gases are needed.

The IGBT PFC inverter is compact for its power and is carried by a strap over the shoulder. The front panel shows a pressure gauge, a cutting current display, a green power LED, a yellow overheat LED, an LED that flags an air supply fault or an incorrectly fitted torch, and an arc-on indicator. A mode switch selects CUT, AIR for setting the air pressure, or cutting of perforated sheet, and the current is adjusted with a potentiometer.

The torch plugs into a central connector, and a CNC connector beside it allows the unit to be linked to an automatic machine. For compressed air preparation the manufacturer recommends the cyclone separator 7704, rated at 700 l, with automatic condensate drain, the AT 1000 air filter (5302) with an adapter for PEGAS PLASMA (5304) and the replaceable filter insert 5303. Only staff trained in plasma cutting should operate the unit. Routine servicing is carried out every six months to ČSN 331500 and ČSN 050630, and the unit must be disconnected from the mains before any work on its electrical section.

Technical specifications

BrandALFA IN
Country of manufactureCzech Republic
Typeplasma cutting power source for manual use
InverterIGBT PFC
Clean cut, carbon steelup to 40 mm
Productive cutting, carbon steelup to 25 mm
Metal separationup to 50 mm
Hand torch includedSVH-105
Starter set7112 (SVH-105, 85-105A)
Coaxial cable6.7 m
Earthing cableincluded
Connection to automatic machineCNC connector
Switch modesCUT, AIR, perforated sheet

Part numbers

Show all part numbers (1)

5.0281.1

Request a price and lead time

ALFA IN PEGAS 101 PLASMA inverter for plasma cutting up to 40 mm. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

Which thickness does the PEGAS 101 PLASMA cut?

Carbon steel: a high-quality cut up to 40 mm and productive cutting up to 25 mm; where lower edge quality is acceptable, the unit separates metal up to 50 mm.

Which torch comes with the PEGAS 101 PLASMA?

The SVH-105 hand torch with a 6.7 m coaxial cable and the 7112 starter set, plus an earthing cable.

Can the PEGAS 101 PLASMA be connected to automation?

Yes, the front panel has a CNC connector; the range also includes a separate PEGAS 101 PLASMA CNC version for gantry tables.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides