
ALFA IN PEGAS 101 PLASMA CNC power source for machine plasma cutting, 100 A
The ALFA IN PEGAS 101 PLASMA CNC is an IGBT PFC plasma power source for machine cutting on CNC gantry tables. It runs from 20 to 100 A, delivers 100 A at 100% duty cycle, cuts productively up to 12 mm and cuts to a maximum of 15 mm.
- Brand
- ALFA IN
- Country of manufacture
- Czech Republic
- Type
- power source for machine plasma cutting
- Inverter
- IGBT PFC
Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.
Description
The PEGAS 101 PLASMA CNC, article 5.0281-1.1, differs from the manual PEGAS 101 PLASMA in its purpose. It is installed on thermal cutting machines and comes without a hand torch. The manufacturer recommends the SVS-125 machine torch (code 7179) with the 9.0 m SV-105, SV-125, SV-160 6 PIN coaxial cable (code 7103). A CNC connector on the front panel carries the machine tool signals.
The unit is three-phase, rated 3 x 400V with a 32 A mains fuse. Cutting current is continuously adjustable from 20 to 100 A, and at both 100% and 60% duty cycle the source delivers 100 A, so full current is available without pauses. The arc is struck by a pneumatic-mechanical method, not by a high-frequency discharge.
For fine-grained steel the manufacturer quotes these thicknesses: productive piercing and cutting to 12 mm, both at full current and at 100% duty cycle, maximum piercing and cutting to 15 mm, and cutting from a side start at the sheet edge up to 30 mm. Carbon, high-alloy and stainless steels and non-ferrous metals are cut quickly, with a narrow heat-affected zone and small thermal distortion. Compressed air powers the source, with a maximum inlet pressure of 8.5 bar, an operating pressure of 5.0 bar and an air consumption of 295 l/min.
The unit weighs 32.4 kg and is carried by a strap over the shoulder. The front panel has a pressure gauge, a display of cutting current, LEDs for power-on, overheating, an air or torch fault and arc on, a current potentiometer, and a mode switch for CUT, AIR and cutting perforated sheet. An earthing cable is included in the set. The IGBT PFC inverter is compact for its power and is intended for heavy engineering and industrial production, and for compressed air the manufacturer recommends the cyclone separator 7704 with automatic condensate drain.
Technical specifications
| Brand | ALFA IN |
|---|---|
| Country of manufacture | Czech Republic |
| Type | power source for machine plasma cutting |
| Inverter | IGBT PFC |
| Mains voltage | 3 x 400V |
| Mains fuse | 32 A |
| Cutting current range | 20–100 A |
| Current at 100% duty cycle | 100 A |
| Current at 60% duty cycle | 100 A |
| Productive piercing and cutting (I2max) | 12 mm |
| Productive piercing and cutting (I2 at 100% duty cycle) | 12 mm |
| Maximum piercing and cutting (I2max) | 15 mm |
| Side-start cutting (I2max) | 30 mm |
| Maximum compressed air inlet pressure | 8.5 bar |
| Operating pressure | 5.0 bar |
| Air consumption | 295 l/min |
| Arc starting | pneumatic-mechanical |
| Current adjustment | stepless |
| Weight | 32.4 kg |
| Recommended torch | SVS-125 (7179) |
Part numbers
Show all part numbers (1)
5.0281-1.1
Request a price and lead time
ALFA IN PEGAS 101 PLASMA CNC power source for machine plasma cutting, 100 A. We reply within one business day.
Or email sales@usk.ua or call 044 339-50-20.
Questions and answers
Which thickness can the PEGAS 101 PLASMA CNC cut on a CNC table?
Productively 12 mm of fine-grained steel, maximum piercing and cutting 15 mm, and cutting from a side start at the sheet edge up to 30 mm.
What mains supply and duty cycle does the PEGAS 101 PLASMA CNC have?
3 x 400V with a 32 A fuse; the source delivers 100 A at both 60% and 100% duty cycle.
Which torch should be used with the PEGAS 101 PLASMA CNC?
The manufacturer recommends the SVS-125 machine torch (code 7179) with a 9.0 m coaxial cable (code 7103).
Similar equipment from other manufacturers






