International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

ALFA IN PEGAS 5 PLASMA NEO inverter plasma cutter, up to 10 mm carbon steel

The ALFA IN PEGAS 5 PLASMA NEO is the smaller sibling in the PEGAS PLASMA NEO line, an IGBT PFC inverter plasma cutter. It cuts carbon steel up to 10 mm at production speed, reaches 20 mm at a slower quality setting and separates metal up to 25 mm.

Brand
ALFA IN
Country of manufacturer
Czech Republic
Type
inverter plasma cutting machine
Inverter
IGBT PFC

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

The PEGAS 5 PLASMA NEO is aimed at thinner sheet than the PEGAS 7 PLASMA NEO. Production cutting of carbon steel goes up to 10 mm, a slower quality cut reaches 20 mm, and metal can be separated up to 25 mm. Article 5.0557 comes with an earth cable and clamp, and the torch is chosen separately.

The IGBT inverter with power factor correction gives a compact body with plenty of output, and the unit is carried on a shoulder strap. The display shows gas flow, cutting current, cutting mode and error codes. Current is set with the encoder, and the mode is chosen with a separate button. An air check button and a pressure gauge are fitted, compressed air enters through an inlet with a water trap, and the earth cable plugs in with a quick-release connector. The maker says it can be connected to an automated system.

Accessories on offer include the reinforced 6 m HS-60 hand torch with a central connector (5048), a 3 m earth cable rated 200 A with a 25 mm² section and 35-50 connector (VM0303), the AT 1000 air filter (5302), a replaceable cartridge (5303) and a kit for connecting the filter to PEGAS PLASMA units (5304).

The manual covers menu language selection, hand torch wiring, commissioning, causes of poor cut quality, pilot arc and cutting faults, error messages and servicing, including lubricating the electrode holder with silicone grease. The machine suits installation and repair work, sheet metal cutting in workshops, and metal structure bays where the material is mostly up to 10 mm. The maker is ALFA IN, Czech Republic.

Technical specifications

BrandALFA IN
Country of manufacturerCzech Republic
Typeinverter plasma cutting machine
InverterIGBT PFC
Production cutting, carbon steelup to 10 mm
Quality cutting (slower)up to 20 mm
Metal separationup to 25 mm
Displaygas flow, cutting current, mode, error codes
Kitearth cable with clamp
AccessoriesHS-60 6 m (5048), 3 m earth cable 200 A 25 mm² (VM0303), AT 1000 filter (5302), cartridge 5303, set 5304

Part numbers

Show all part numbers (1)

5.0557

Request a price and lead time

ALFA IN PEGAS 5 PLASMA NEO inverter plasma cutter, up to 10 mm carbon steel. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

How thick a carbon steel can the PEGAS 5 PLASMA NEO cut?

Production cutting of carbon steel up to 10 mm, quality cutting up to 20 mm at a slower speed, and metal separation up to 25 mm.

How does the PEGAS 5 differ from the PEGAS 7 PLASMA NEO?

The PEGAS 5 is the junior model for thinner sheet, with production cutting up to 10 mm, while the PEGAS 7 PLASMA NEO is designed for thicker metal.

Which torch is used with the machine?

The HS-60 hand torch, which the manufacturer also offers in a reinforced 6 m version with cable (5048).

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides