
ALFA IN PEGAS 121 PLASMA CNC power source for machine plasma cutting, 120 A
The ALFA IN PEGAS 121 PLASMA CNC is an IGBT PFC plasma power source for machine cutting on CNC cutting tables. It runs from 20 to 120 A, delivers 120 A at 60% duty cycle, cuts productively up to 20 mm and cuts to a maximum of 25 mm.
- Brand
- ALFA IN
- Country of manufacture
- Czech Republic
- Type
- power source for machine plasma cutting
- Inverter
- IGBT PFC
Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.
Description
The PEGAS 121 PLASMA CNC, article 5.0288-1.1, is the higher-rated machine source in the series. Compared with the PEGAS 101 PLASMA CNC, its upper current limit is 120 A instead of 100 A, and its thickness figures are larger: productive cutting of 20 mm against 12 mm, maximum cutting of 25 mm against 15 mm, and side-start cutting of 45 mm against 30 mm. The source comes without a hand torch, and the manufacturer recommends the SVS-125 machine torch (code 7179) with the 9.0 m SV-105, SV-125, SV-160 6 PIN coaxial cable (code 7103).
The unit runs from a three-phase 3 x 400V supply with a 32 A mains fuse. Cutting current is continuously adjustable from 20 to 120 A. At 60% duty cycle the source delivers 120 A, and at 100% duty cycle it holds 100 A. At 100 A, productive piercing and cutting of fine-grained steel reaches 12 mm, and at maximum current it reaches 20 mm. The arc is struck by a pneumatic-mechanical method.
For compressed air the maximum inlet pressure is 8.5 bar, the operating pressure is 5.0 bar and the air consumption is 295 l/min. The manufacturer advises fitting the cyclone separator 7704 upstream of the source with automatic condensate drain, so that moisture does not reach the torch. The unit weighs 32.4 kg and has a carrying strap.
The CNC connector on the front panel links to the machine controller. Beside it are the central torch connector and the earthing cable, along with the pressure gauge, a cutting current display, LEDs for power-on, overheating, an air or torch fault and arc on, a mode switch for CUT, AIR and cutting perforated sheet, and a current potentiometer. The IGBT PFC inverter is compact for its power and is intended for heavy engineering and industrial production. The manufacturer's documentation also describes the TM-125 machine torch, and trained staff carry out servicing every six months to ČSN 331500 and ČSN 050630.
Technical specifications
| Brand | ALFA IN |
|---|---|
| Country of manufacture | Czech Republic |
| Type | power source for machine plasma cutting |
| Inverter | IGBT PFC |
| Mains voltage | 3 x 400V |
| Mains fuse | 32 A |
| Cutting current range | 20–120 A |
| Current at 100% duty cycle | 100 A |
| Current at 60% duty cycle | 120 A |
| Productive piercing and cutting (I2max) | 20 mm |
| Productive piercing and cutting (I2 at 100% duty cycle) | 12 mm |
| Maximum piercing and cutting (I2max) | 25 mm |
| Side-start cutting (I2max) | 45 mm |
| Maximum compressed air inlet pressure | 8.5 bar |
| Operating pressure | 5.0 bar |
| Air consumption | 295 l/min |
| Arc starting | pneumatic-mechanical |
| Current adjustment | stepless |
| Weight | 32.4 kg |
| Recommended torch | SVS-125 (7179) |
Part numbers
Show all part numbers (1)
5.0288-1.1
Request a price and lead time
ALFA IN PEGAS 121 PLASMA CNC power source for machine plasma cutting, 120 A. We reply within one business day.
Or email sales@usk.ua or call 044 339-50-20.
Questions and answers
What thickness does the PEGAS 121 PLASMA CNC cut?
Productively 20 mm of fine-grained steel at maximum current, maximum piercing and cutting 25 mm, and side-start cutting 45 mm.
What current does the PEGAS 121 PLASMA CNC deliver at each duty cycle?
120 A at 60% duty cycle and 100 A at 100% duty cycle, with stepless adjustment from 20 A.
How does the PEGAS 121 PLASMA CNC differ from the PEGAS 101 PLASMA CNC?
The current goes up to 120 A instead of 100 A, and the thickness figures are larger: 20 mm productive against 12 mm, 25 mm maximum against 15 mm; the weight is the same at 32.4 kg.
Similar equipment from other manufacturers






