
ALFA IN PEGAS 121 PLASMA inverter for plasma cutting up to 50 mm with SVH-125 torch
The ALFA IN PEGAS 121 PLASMA is an IGBT PFC plasma cutter for manual cutting of carbon steel, supplied with the SVH-125 torch. It cuts productively up to 25 mm, cuts cleanly but more slowly up to 50 mm and separates metal up to 60 mm.
- Brand
- ALFA IN
- Country of manufacture
- Czech Republic
- Type
- plasma cutting power source for manual use
- Inverter
- IGBT PFC
Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.
Description
The PEGAS 121 PLASMA, article 5.0288.1, is the higher-rated manual model in the ALFA IN PEGAS PLASMA range. Compared with the smaller manual unit in the series, it offers more thickness headroom, with a clean cut up to 50 mm and metal separation up to 60 mm. The package includes the SVH-125 hand torch with a 6.7 m coaxial cable (codes 7039+7076) and an earthing cable with its clamp. The manufacturer also describes a set-up with the TH-125 torch.
For carbon steel the limits are as follows. Productive cutting goes to 25 mm, a higher-quality cut at a slower travel speed goes to 50 mm, and simple separation of the workpiece goes to 60 mm. Plasma offers high cutting speed, a narrow heat-affected zone and smaller thermal distortion. Carbon, high-alloy and stainless steels and non-ferrous metals can be cut, and no special gases are required.
The IGBT PFC inverter is compact for its power and is carried by a strap over the shoulder. The front panel shows a pressure gauge, a cutting current display, a green power LED, a yellow overheat LED, an LED for an air supply or torch fault, and an arc-on indicator. A potentiometer sets the current, and a mode switch selects CUT, AIR for setting the air pressure, or cutting of perforated sheet. A CNC connector allows the unit to be linked to an automatic machine.
Further torches from the SVH-125 series fit the PEGAS 121 PLASMA: one with a 15° head (code 7040) and one with an 80 cm handle set at 90° (code 7087). A starter set for the first start-up is available under code 7113. An additional earthing cable, ALFIN 3m 10-25 200 A 16 mm2, is listed under code V9030038. Compressed air is prepared with the cyclone separator 7704, rated at 700 l, with automatic condensate drain, the AT 1000 air filter (5302) with an adapter for PEGAS PLASMA (5304) and the replacement insert 5303. Routine servicing is carried out every six months to ČSN 331500 and ČSN 050630, and only trained staff should operate the unit.
Technical specifications
| Brand | ALFA IN |
|---|---|
| Country of manufacture | Czech Republic |
| Type | plasma cutting power source for manual use |
| Inverter | IGBT PFC |
| Productive cutting, carbon steel | up to 25 mm |
| Clean cut, carbon steel | up to 50 mm |
| Metal separation | up to 60 mm |
| Torch included | SVH-125 (7039) |
| Coaxial cable | 6.7 m (7076) |
| Earthing cable | included |
| Connection to automatic machine | CNC connector |
| Switch modes | CUT, AIR, perforated sheet |
| Starter set | 7113 |
Part numbers
Show all part numbers (1)
5.0288.1
Request a price and lead time
ALFA IN PEGAS 121 PLASMA inverter for plasma cutting up to 50 mm with SVH-125 torch. We reply within one business day.
Or email sales@usk.ua or call 044 339-50-20.
Questions and answers
Which thickness does the PEGAS 121 PLASMA cut?
Carbon steel: productively up to 25 mm, with a higher-quality cut at a slower speed up to 50 mm, and separation of the workpiece up to 60 mm.
What is included with the PEGAS 121 PLASMA?
The unit, the SVH-125 hand torch with a 6.7 m coaxial cable (codes 7039+7076) and an earthing cable with its clamp.
Which other torches can be used with the PEGAS 121 PLASMA?
SVH-125 series torches: one with a 15° head (code 7040) or one with an 80 cm handle set at 90° (code 7087).
Similar equipment from other manufacturers






