International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

Kühtreiber PT 60 AIR plasma cutting torch, 60 A, air-cooled, 6 m

The Kühtreiber PT 60 AIR is an air-cooled plasma torch intended for the MAKin CUT 40 AIR Pilot cutting unit. Its highest current is 60 A at a 60 % duty cycle, the length is 6 m and the gas pressure is 4.4 - 5.0 bar.

Brand
Kühtreiber
Type
plasma torch
Maximum current
60 A (at 60 % duty cycle)
Cooling
air

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

The PT 60 AIR is the torch the Czech maker pairs with the MAKin CUT 40 AIR Pilot plasma cutter. It serves as a replacement for a worn original torch, as a spare held in reserve for a working unit, or as a fitting for a second station running the same power source. The catalogue carries another torch, the PT 60, with the same current rating but a different list of compatible machines, so the AIR suffix must be checked against the unit you own.

Maximum current is 60 A at a 60 % duty cycle. Near that limit the torch runs to a load cycle with pauses, so for long cuts plan the settings around the duty figure.

Cooling is air-based, so there is no liquid unit, pump or coolant hose to install. The station is made up of the power source, the torch and a gas feed alone. This arrangement suits shop cutting of thin sheet, repair and installation work, particularly when the machine is moved often.

Working gas pressure is 4.4 - 5.0 bar and should be set and checked before cutting begins. The 6 m length allows you to reach the workpiece without repositioning the power source. Lay the torch lead without sharp bends, and do not leave it under the work or on freshly cut hot metal.

The manufacturer's order number is 068710071. Include it together with your machine model in any enquiry so that the correct torch is identified.

Technical specifications

BrandKühtreiber
Typeplasma torch
Maximum current60 A (at 60 % duty cycle)
Coolingair
Gas pressure4.4 - 5.0 bar
Length6 m
Compatible machinesMAKin CUT 40 AIR Pilot
Country of manufactureCzech Republic

Part numbers

Show all part numbers (1)

068710071

Request a price and lead time

Kühtreiber PT 60 AIR plasma cutting torch, 60 A, air-cooled, 6 m. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

Which cutting unit is the PT 60 AIR built for?

The manufacturer states compatibility with the Kühtreiber MAKin CUT 40 AIR Pilot plasma cutter.

How does the PT 60 AIR differ from the PT 60?

Both carry 60 A at a 60 % duty cycle, but the manufacturer links them to different machines: the PT 60 AIR goes with the MAKin CUT 40 AIR Pilot.

What gas pressure does it need?

Working gas pressure is 4.4 - 5.0 bar, and the torch is cooled by air.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides