International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

Kühtreiber MAKin Cut 40 PFC Pilot plasma cutting inverter, 20 to 40 A, with PFC and pilot arc

The Kühtreiber MAKin Cut 40 PFC Pilot is a single-phase plasma cutting inverter from the MAKin Cut series, using PFC and a pilot arc to cut metals at 20 to 40 A. The maximum separation thickness is 20 mm, with a clean cut in steel up to 15 mm, and the unit keeps cutting steady when mains voltage dips.

Brand
Kühtreiber
Model
MAKin Cut 40 PFC Pilot
Supply voltage 50/60 Hz
1 x 230 V (-60 %; + 15 %)
Fuse, slow-blow
16 A

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

The MAKin Cut 40 PFC Pilot is built as a power source with the steeply falling characteristic that a plasma arc needs. The power section uses a ferrite-core high-frequency transformer and transistors, the controller is digital and the boards use SMD technology. A fast control system keeps the arc stable during the cut. The maker cites an efficiency of 85 %, economical running, simple servicing and compliance with the EU ecodesign rules for welding equipment.

The unit runs from a single-phase 1 x 230 V supply, with a tolerance of -60 % to + 15 %, at 50/60 Hz, and needs a 16 A slow-blow fuse. Cutting current is adjustable from 20 to 40 A. At 40 °C the duty cycle is 100 % at 30 A, while at the 40 A maximum it runs at 60 %. The no-load voltage is 320 V and the power is 4.9 kW. The PFC, or power factor correction, keeps the cut steady when mains voltage fluctuates and when the unit works through long extension leads.

According to Kühtreiber, a clean cut with an even edge is possible in carbon steel up to 15 mm, stainless steel up to 12 mm, aluminium up to 10 mm and copper up to 4 mm. The maximum separation thickness is 20 mm: metal of that thickness is cut through, but the edge then needs further finishing. Planning is best based on the clean-cut values, with the maximum kept for occasional separation work.

The arc is started without contact through a pilot arc that burns between the electrode and the nozzle before the torch touches the metal, so the torch does not extinguish on perforated sheet, mesh or grating, and a separate mode serves perforated material. Alongside the standard cutting mode there is a gas test to check air flow before work, air pressure shown on the panel, automatic torch monitoring, air pressure monitoring and thermal protection against overheating. A carry handle is fitted, and the air comes from an external compressor or a workshop air line. Dimensions are 505 x 147 x 305 mm, the source weighs 8 kg, and the protection class is IP23 H. Part number 068710013. It suits workshops, service departments and repair and installation work, especially where mains voltage sags or the supply cable is long.

Technical specifications

BrandKühtreiber
ModelMAKin Cut 40 PFC Pilot
Supply voltage 50/60 Hz1 x 230 V (-60 %; + 15 %)
Fuse, slow-blow16 A
Cutting current range20 - 40 A
Duty cycle 100% (40 °C)30 A
Duty cycle 60% (40 °C)40 A
Maximum cutting thickness20 mm
Clean cut, steel15 mm
Clean cut, stainless steel12 mm
Clean cut, aluminium10 mm
Clean cut, copper4 mm
No-load voltage320 V
Power4.9 kW
Efficiency85 %
Protection classIP23 H
Dimensions505 x 147 x 305 mm
Source weight8 kg
Arc ignitioncontactless, pilot arc
EquipmentPFC, pilot arc, gas test, standard cutting mode, perforated material cutting mode, air pressure indication, torch monitoring, air pressure monitoring, thermal protection, carry handle

Part numbers

Show all part numbers (1)

068710013

Request a price and lead time

Kühtreiber MAKin Cut 40 PFC Pilot plasma cutting inverter, 20 to 40 A, with PFC and pilot arc. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

Which thicknesses does the MAKin Cut 40 PFC Pilot cut?

A clean cut in steel up to 15 mm, stainless steel up to 12 mm, aluminium up to 10 mm and copper up to 4 mm, with a maximum separation thickness of 20 mm.

Which mains supply does it need?

A single-phase 1 x 230 V supply at 50/60 Hz with a 16 A slow-blow fuse.

What duty cycle applies at 40 °C?

At 40 °C it runs at 100 % duty cycle on 30 A, and at its 40 A maximum the duty cycle is 60 %.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides