International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

Kühtreiber MAKin Cut 40 HF plasma cutting inverter with HF ignition, 230 V, 20 to 40 A

The Kühtreiber MAKin Cut 40 HF is a compact single-phase plasma cutting inverter with high-frequency arc ignition for cutting metal at 20 to 40 A. It makes clean cuts up to 15 mm in carbon steel and separates material up to 20 mm thick. The source weighs 7.3 kg.

Brand
Kühtreiber
Model
MAKin Cut 40 HF
Supply voltage 50/60 Hz
1 x 230 V (± 15 %)
Slow fuse
16 A

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

The Kühtreiber MAKin Cut 40 HF is built as a power source with the steeply falling characteristic a plasma arc needs. Its power section is based on a high-frequency transformer with a ferrite core and transistors, and the control is digital with SMD circuit boards. A fast control system keeps the arc steady while cutting. The manufacturer cites an efficiency of 85 %, economical running, simple servicing and compliance with EU ecodesign standards for welding machines.

The unit runs from a single-phase 1 x 230 V supply (± 15 %) at 50/60 Hz and uses a 16 A slow fuse. Cutting current is set between 20 and 40 A. At 40 °C the 100 % duty cycle is reached at 30 A, while the maximum 40 A setting gives a 60 % duty cycle. The open-circuit voltage is 320 V and the power rating is 4.9 kW. A single-phase supply with a 16 A fuse allows operation from an ordinary socket.

Per the manufacturer, clean cuts are possible up to 15 mm in carbon steel, 12 mm in stainless steel, 10 mm in aluminium and 4 mm in copper. The maximum separating thickness is 20 mm for steel. Metal is cut through at that thickness, but the edge will need further finishing, so planning should be based on the clean-cut values and the maximum is best reserved for occasional separation work.

The arc is struck without contact by a high-frequency discharge, so the nozzle never has to touch the metal. A dedicated mode handles perforated materials such as mesh and grating. A gas test checks air flow before work starts, and an air pressure indicator sits on the panel. Automatic torch control, automatic air pressure control and thermal protection against overheating are also built in, and a carrying handle is fitted to the housing. Compressed air comes from an external compressor or a site air line.

The housing measures 505 x 147 x 305 mm, weighs 7.3 kg and carries an IP23 H enclosure rating. Part number 068710084. Its weight and size make it easy to carry by hand, which suits service calls, workshop use and installation work with thin sheet.

Technical specifications

BrandKühtreiber
ModelMAKin Cut 40 HF
Supply voltage 50/60 Hz1 x 230 V (± 15 %)
Slow fuse16 A
Current range20 - 40 A
Duty cycle 100 % (40 °C)30 A
Duty cycle 60 % (40 °C)40 A
Maximum cutting thickness20 mm
Clean cut, steel15 mm
Clean cut, stainless steel12 mm
Clean cut, aluminium10 mm
Clean cut, copper4 mm
No-load voltage320 V
Power4.9 kW
Efficiency85 %
Protection classIP23 H
Dimensions505 x 147 x 305 mm
Source weight7.3 kg
Arc ignitioncontactless, HF
EquipmentHF ignition, gas test, standard cutting mode, perforated material cutting mode, air pressure indicator, automatic torch control, automatic air pressure control, thermal protection, carrying handle

Part numbers

Show all part numbers (1)

068710084

Request a price and lead time

Kühtreiber MAKin Cut 40 HF plasma cutting inverter with HF ignition, 230 V, 20 to 40 A. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

How thick can the MAKin Cut 40 HF cut?

Clean cut thickness is 15 mm for carbon steel, 12 mm for stainless steel, 10 mm for aluminium and 4 mm for copper, with a maximum separating thickness of 20 mm.

Which mains supply does the unit need?

It needs a single-phase 1 x 230 V, 50/60 Hz supply with a 16 A slow fuse.

Does the MAKin Cut 40 HF have a pilot arc?

No, this model uses contactless high-frequency HF ignition, while versions with a pilot arc carry the Pilot name in the MAKin Cut range.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides