
Kühtreiber MAKin Cut 100 Pilot plasma cutter, 20–100 A, cuts up to 50 mm
The Kühtreiber MAKin Cut 100 Pilot is a three-phase plasma inverter for cutting metals at 20 to 100 A. It cleanly cuts carbon steel up to 40 mm and stainless steel up to 30 mm, with a maximum separation thickness of 50 mm, and its pilot arc allows perforated sheet and mesh to be cut.
- Brand
- Kühtreiber
- Model
- MAKin Cut 100 Pilot
- Supply voltage 50/60 Hz
- 3 x 400 V (±15 %)
- Slow-blow fuse
- 20 A
Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.
Description
The MAKin Cut 100 Pilot is built as a source with the falling volt-ampere characteristic that a plasma arc needs. Its power section uses a high-frequency transformer with a ferrite core and transistors, the controls are digital and the boards use SMD technology. A fast control system keeps the arc steady while cutting. The maker quotes 85 % efficiency, energy-saving operation, straightforward maintenance and compliance with EU ecodesign rules for welding equipment.
Power comes from a three-phase 3 x 400 V (±15 %) supply at 50/60 Hz, protected by a 20 A slow-blow fuse. The cutting current runs from 20 to 100 A. At 40 °C the unit reaches a 100 % duty cycle at 80 A, and at its maximum of 100 A the duty cycle is 60 %. The open-circuit voltage is 450 V and the power is 10.4 kW. The ±15 % mains tolerance gives a margin when voltage dips on remote parts of a shop.
According to Kühtreiber, clean cuts with an even edge can be made in carbon steel up to 40 mm, in stainless steel up to 30 mm, in aluminium up to 20 mm and in copper up to 15 mm. The maximum separation thickness is 50 mm: metal is cut through at that thickness, but the edge needs further finishing. Planning should rely on the clean-cut figures, with the maximum kept for occasional separating operations.
Arc ignition is contactless and relies on a pilot arc that burns between electrode and nozzle before the metal is reached. The torch therefore stays lit over perforated sheet, mesh and grating, and a dedicated mode covers such materials. The unit also offers an air test before work, an air pressure display, automatic monitoring of the torch and of the air pressure, and thermal protection against overheating.
The housing measures 640 x 270 x 500 mm, weighs 27 kg and carries an IP23 H rating; the manufacturer's article number is 068710015. The maker aims the MAKin Cut 100 Pilot at cutting bays, metal structures, equipment repair and installation work where plate of medium and heavy thickness is cut.
Technical specifications
| Brand | Kühtreiber |
|---|---|
| Model | MAKin Cut 100 Pilot |
| Supply voltage 50/60 Hz | 3 x 400 V (±15 %) |
| Slow-blow fuse | 20 A |
| Current range | 20 – 100 A |
| Duty cycle 100 % (40 °C) | 80 A |
| Duty cycle 60 % (40 °C) | 100 A |
| Maximum cutting thickness | 50 mm |
| Clean cut, carbon steel | 40 mm |
| Clean cut, stainless steel | 30 mm |
| Clean cut, aluminium | 20 mm |
| Clean cut, copper | 15 mm |
| Open-circuit voltage | 450 V |
| Power | 10.4 kW |
| Efficiency | 85 % |
| Protection rating | IP23 H |
| Dimensions | 640 x 270 x 500 mm |
| Source weight | 27 kg |
| Arc ignition | contactless, pilot arc |
| Equipment | pilot arc, air test, standard cutting mode, perforated material cutting mode, air pressure indication, automatic torch control, automatic air pressure control, thermal protection |
Part numbers
Show all part numbers (1)
068710015
Request a price and lead time
Kühtreiber MAKin Cut 100 Pilot plasma cutter, 20–100 A, cuts up to 50 mm. We reply within one business day.
Or email sales@usk.ua or call 044 339-50-20.
Questions and answers
What thickness does the MAKin Cut 100 Pilot cut?
Clean cuts in carbon steel up to 40 mm, stainless steel up to 30 mm, aluminium up to 20 mm and copper up to 15 mm, with a maximum separation thickness of 50 mm.
What current can it deliver at the 100 % duty cycle?
At 40 °C the unit runs continuously at 80 A, and at its maximum of 100 A it runs at a 60 % duty cycle.
What power supply does it need?
A three-phase 3 x 400 V (±15 %), 50/60 Hz supply with a 20 A slow-blow fuse.
Similar equipment from other manufacturers






