International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

Kühtreiber KITin Cut 40 PFC Pilot plasma cutting inverter with PFC, 230 V, 20 to 40 A

The Kühtreiber KITin Cut 40 PFC Pilot is a single-phase plasma cutting inverter with power factor correction and a pilot arc for cutting metal at 20 to 40 A. It makes clean cuts up to 15 mm in carbon steel and separates material up to 20 mm thick. It is designed to cope with unstable mains and long extension leads.

Brand
Kühtreiber
Model
KITin Cut 40 PFC Pilot
Supply voltage 50/60 Hz
1 x 230 V (-60 %; + 15 %)
Slow fuse
16 A

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

The Kühtreiber KITin Cut 40 PFC Pilot is built as a power source with the steeply falling characteristic a plasma arc requires. The power section relies on a high-frequency transformer with a ferrite core and transistors, and the control is digital with SMD circuit boards. A fast control system keeps the arc stable during the cut. The manufacturer cites an efficiency of 85 %, economical running, simple servicing and compliance with EU ecodesign standards for welding machines.

It runs from a single-phase 1 x 230 V supply at 50/60 Hz, protected by a 16 A slow fuse, and the permissible range is given as -60 % to +15 %. Cutting current is adjustable between 20 and 40 A. At 40 °C the 100 % duty cycle applies at 30 A, while the maximum 40 A setting gives 60 %. The no-load voltage is 320 V and the power rating is 4.9 kW. Power factor correction keeps the cut steady when mains voltage fluctuates and when long extension leads are used.

Per the manufacturer, the clean-cut limits are 15 mm for carbon steel, 12 mm for stainless steel, 10 mm for aluminium and 4 mm for copper. Separation cuts can reach 20 mm in steel. Those deeper cuts go through the material, though the edge needs further processing afterwards, so schedule work around the clean-cut figures and reserve the maximum for one-off jobs.

The pilot arc burns between electrode and nozzle before the torch touches the metal, so the torch stays lit over perforated sheet, mesh and grating, and a separate mode is provided for perforated work. Other features include a gas test to check air flow before starting, an air pressure indicator on the panel, automatic torch and air pressure control and thermal protection against overheating. A carrying handle is fitted, and compressed air comes from an external compressor or a site air supply.

The housing measures 505 x 147 x 305 mm and weighs 8 kg, with an IP23 H enclosure rating. Part number 068710390. It suits building sites, service work and callouts where the supply comes from a weak network, a generator or a long cable.

Technical specifications

BrandKühtreiber
ModelKITin Cut 40 PFC Pilot
Supply voltage 50/60 Hz1 x 230 V (-60 %; + 15 %)
Slow fuse16 A
Current range20 - 40 A
Duty cycle 100 % (40 °C)30 A
Duty cycle 60 % (40 °C)40 A
Maximum cutting thickness20 mm
Clean cut, steel15 mm
Clean cut, stainless steel12 mm
Clean cut, aluminium10 mm
Clean cut, copper4 mm
No-load voltage320 V
Power4.9 kW
Efficiency85 %
Protection classIP23 H
Dimensions505 x 147 x 305 mm
Source weight8 kg
Arc ignitioncontactless, pilot arc
EquipmentPFC, pilot arc, gas test, standard cutting mode, perforated material cutting mode, air pressure indicator, automatic torch control, automatic air pressure control, thermal protection, carrying handle

Part numbers

Show all part numbers (1)

068710390

Request a price and lead time

Kühtreiber KITin Cut 40 PFC Pilot plasma cutting inverter with PFC, 230 V, 20 to 40 A. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

How thick can the KITin Cut 40 PFC Pilot cut?

Clean cut thickness is 15 mm for carbon steel, 12 mm for stainless steel, 10 mm for aluminium and 4 mm for copper, with a maximum separating thickness of 20 mm.

Which mains supply does the unit need?

It needs a single-phase 1 x 230 V, 50/60 Hz supply with a 16 A slow fuse.

Can the unit run from a generator or through an extension lead?

Yes, the PFC technology keeps the cut steady when voltage fluctuates or long extension leads are used, with a supply tolerance of -60 % to +15 %.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides