International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

Kjellberg Smart Focus 300 plasma cutting system, 35-300 A, cuts up to 80 mm

The Kjellberg Smart Focus 300 cuts carbon steel, stainless steel and aluminium on CNC machines up to 80 mm, with a recommended range of 1 to 60 mm. Cutting current runs from 35 to 300 A and marking from 10 to 50 A.

Brand
Kjellberg
Power source
Smart Focus 300
Mains voltage
3x 400 V, 50 Hz (others to order)
Cutting current
35-300 A

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

The Smart Focus 300 is the model with the highest cutting current in the Smart Focus series from Kjellberg. It cuts up to 80 mm, with a recommended range of 1 to 60 mm, and pierces up to 40 mm. Cutting current is adjustable from 35 to 300 A, and marking current from 10 to 50 A. Like its siblings, the unit is set up with a few parameters and then delivers clean cuts and high speed even in difficult conditions.

On carbon steel, Contour Cut delivers precise contours and holes at a diameter-to-thickness ratio of 1:1. Contour Cut Speed produces contour cutting of similar quality at up to 50% higher speed. Silent Cut, the development of Contour Cut, lowers the sound pressure to 15 dB(A) when cutting with 60 to 160 A.

Stainless steel and aluminium are covered by HiFinox for 1 to 6 mm, with clearly less dross, and by Ar/H2 Mix from 6 mm, with the gases actively mixed. The unit also marks parts and adds notches and centre punches.

The manufacturer has reworked the gas control blocks and torches to protect consumables, reduce gas consumption and lower the cost per metre of cut. Plasma gases are O2, Ar / H2, N2 and air, and Ar or N2 serves for piercing. The machine torch is the PerCut 2000 and the quick change head is the PerCut 4000, a pair shared by the whole Smart Focus series, so a workshop with several units keeps one common stock of torches and wear parts.

The supply is 3x 400 V at 50 Hz, with other voltages and frequencies to order. The unit measures 1030 x 680 x 1450 mm and weighs 488 kg. It is installed on CNC thermal cutting machines in blank preparation sections and metal fabrication.

Technical specifications

BrandKjellberg
Power sourceSmart Focus 300
Mains voltage3x 400 V, 50 Hz (others to order)
Cutting current35-300 A
Marking current10-50 A
Cutting range, maximum80 mm
Cutting range, recommended1-60 mm
Piercing40 mm
Plasma gasesO2, Ar / H2, N2, air
Piercing gasesAr, N2
Dimensions (D x W x H)1030 x 680 x 1450 mm
Weight488 kg
Machine torchPerCut 2000
Quick change headPerCut 4000

Request a price and lead time

Kjellberg Smart Focus 300 plasma cutting system, 35-300 A, cuts up to 80 mm. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

What thickness does the Smart Focus 300 cut?

Up to 80 mm at maximum, with a recommended range of 1 to 60 mm and piercing from a standing start at 40 mm.

Which gases does the unit use?

Plasma gases O2, Ar / H2, N2 and air, with Ar or N2 for piercing.

Can the Smart Focus 300 cut stainless steel and aluminium?

Yes, HiFinox covers 1 to 6 mm and Ar/H2 Mix is used for thicknesses from 6 mm.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides