International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

Kjellberg NT40 autotransformer for plasma cutting units, up to 40 kVA

The Kjellberg NT40 autotransformer connects plasma cutting units rated for a 3x 400 V supply to networks of 3x 440 V, 3x 480 V and 3x 500 V. It is designed for units up to 40 kVA running at a 100% duty cycle.

Brand
Kjellberg
Type
AC autotransformer
Input voltage
3x 500 V + PE (50 Hz), 3x 480 V + PE (60 Hz), 3x 440 V + PE (60 Hz)
Output voltage
3x 400 V + PE (50-60 Hz)

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

Kjellberg plasma cutting units and many other sources are built for a three-phase 3x 400 V supply. Where a workshop runs on a 440, 480 or 500 V network, a matching transformer is placed between the mains and the unit. For this purpose Kjellberg supplies the NT40 AC autotransformer, which the manufacturer's documents also list as NT 40.

Three input variants are available: 3x 500 V + PE at 50 Hz, 3x 480 V + PE at 60 Hz, or 3x 440 V + PE at 60 Hz. On the output side the NT40 delivers 3x 400 V + PE at 50-60 Hz, which is the standard supply for a plasma cutting unit. The protective earth conductor PE passes through the transformer on both sides.

The rated power of the connected unit reaches 40 kVA at a 100% duty cycle. In other words, the autotransformer is rated for continuous operation at full load, which suits CNC table cutting that runs in shifts without pauses. Before selecting the NT40, check that the unit's power draw does not exceed 40 kVA.

The housing measures 700 x 290 x 380 mm and weighs 69 kg. It is placed next to the unit or close to the workshop's distribution board and connected with a cable of suitable cross-section.

The NT40 suits workshops where a different mains voltage is already wired, equipment that is moved from one site to another, and areas supplied at 60 Hz.

Technical specifications

BrandKjellberg
TypeAC autotransformer
Input voltage3x 500 V + PE (50 Hz), 3x 480 V + PE (60 Hz), 3x 440 V + PE (60 Hz)
Output voltage3x 400 V + PE (50-60 Hz)
Rated power of the unitup to 40 kVA
Duty cycle100%
Dimensions (L x W x H)700 x 290 x 380 mm
Weight69 kg

Request a price and lead time

Kjellberg NT40 autotransformer for plasma cutting units, up to 40 kVA. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

What is the NT40 used for?

It connects plasma cutting units that run on 3x 400 V to mains of 3x 440 V, 3x 480 V or 3x 500 V.

What unit power can the NT40 handle?

Up to 40 kVA at a 100% duty cycle, which means continuous operation.

Does the NT40 work on a 60 Hz network?

Yes, the 3x 480 V and 3x 440 V inputs are rated for 60 Hz, the 3x 500 V input for 50 Hz, and the 3x 400 V output works at 50-60 Hz.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides