International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

Kjellberg K 200 plasma cutting power source, 200 A, cuts 1-60 mm with O2, N2 or air

Kjellberg K 200 cuts structural and stainless steel and aluminium from 1 to 60 mm thick with oxygen, nitrogen or air. It works on CNC machines via RS-485 and with hand-held plasma torches, including for gouging. The design emphasises simple operation and low purchase and running costs.

Brand
Kjellberg
Cutting current at 100% duty cycle (40 °C)
60 - 200 A
Marking current at 100% duty cycle (40 °C)
35 A
Structural steel, maximum / piercing (O2/Air)
60 mm / 35 mm

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

The K 200 follows a cutting-only design, built for stable results, simple operation and modest purchase and running costs. Cutting current is 60 to 200 A at 100% duty cycle and an ambient temperature of 40 °C, and the source handles metal from 1 to 60 mm thick, suitable for both mechanised and hand-held plasma cutting. Marking current is 35 A.

Depending on the task, the K 200 cuts with oxygen, nitrogen or air as plasma gas. Nitrogen or air serves as swirl gas, and air is used for marking. Built-in automatic gas control and direct connection of the torch make installation and servicing simpler. Structural steel is cut up to 60 mm with piercing at 35 mm, on both O2/Air and pure air. Stainless steel reaches 40 mm with piercing at 25 mm on N2/N2, or 60 mm with piercing at 30 mm on Air/Air. Aluminium reaches 40 mm with piercing at 20 mm on N2/N2, or 50 mm with piercing at 30 mm on Air/Air.

On gantries and coordinate machines the K 200 runs in CNC mode, controlled over RS-485. For manual work there are the K-Torch M and K-Torch MS torches, which can also be used for gouging. The K-Desk app lets a smartphone monitor, select and adjust the cutting process parameters.

The manufacturer also stresses cutting with compressed air, where air is supplied both as plasma gas and as swirl gas. Structural and stainless steel and aluminium can all be cut this way. For suitable tasks it reduces the need for extra gases and simplifies work where technical gases are hard to deliver or need separate logistics. Oxygen or nitrogen is connected only when the material or task calls for it.

The K 200 measures 1078 x 684 x 1231 mm and weighs 351 kg. It is supplied for 3 x 400 V, 50 Hz, with other voltages and frequencies available on request. It has an 80 A slow-blow fuse, a maximum connected power of 52 kVA and IP 21S protection.

Technical specifications

BrandKjellberg
Cutting current at 100% duty cycle (40 °C)60 - 200 A
Marking current at 100% duty cycle (40 °C)35 A
Structural steel, maximum / piercing (O2/Air)60 mm / 35 mm
Structural steel, maximum / piercing (Air/Air)60 mm / 35 mm
Stainless steel, maximum / piercing (N2 / N2)40 mm / 25 mm
Stainless steel, maximum / piercing (Air/Air)60 mm / 30 mm
Aluminium, maximum / piercing (N2 / N2)40 mm / 20 mm
Aluminium, maximum / piercing (Air/Air)50 mm / 30 mm
Plasma gasesO2, N2, Air
Swirl gasesN2, Air
Marking gasAir
CNC controlRS-485
Hand-held torchesK-Torch M, K-Torch MS
Dimensions (L x W x H)1078 x 684 x 1231 mm
Weight351 kg
Fuse, slow-blow80 A
Mains voltage3 x 400 V, 50 Hz (other on request)
Max. connected power52 kVA
Protection classIP 21S

Request a price and lead time

Kjellberg K 200 plasma cutting power source, 200 A, cuts 1-60 mm with O2, N2 or air. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

What thickness of metal does the K 200 cut?

From 1 to 60 mm: structural steel up to 60 mm, stainless steel up to 60 mm on air, and aluminium up to 50 mm on air.

Can the K 200 be used for manual cutting?

Yes, the K-Torch M and K-Torch MS torches are available for hand cutting and gouging. On machines the source is controlled from CNC via RS-485.

Is it possible to work without technical gas cylinders?

Yes, the K 200 cuts structural and stainless steel and aluminium using compressed air as both plasma and swirl gas. Oxygen or nitrogen is connected when needed.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides