International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

Kjellberg iQ 3000 plasma cutting power source for automated systems, 300 A

The Kjellberg iQ 3000 from the iQ-Series is built for automated plasma cutting systems where parts, materials and thicknesses change often. Cutting current runs from 20 to 300 A at 100% duty cycle, and structural steel is cut up to 80 mm. It is used in mechanical engineering, steel construction and series production.

Brand
Kjellberg
Series
iQ-Series
Version
iQ 3000 / iQ 3000 plus
Cutting current at 100% duty cycle (40 °C)
20 - 300 A

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

The Kjellberg iQ 3000 is part of the iQ-Series and combines automated plasma cutting with flexibility for changing requirements. Different blanks, thicknesses and cut quality demands call for stable process conditions, and this source gives repeatable results with consistent cut quality. Cutting current is adjustable from 20 to 300 A at 100% duty cycle and an ambient temperature of 40 °C, while marking current runs from 5 to 60 A. At its maximum current the iQ 3000 cuts structural steel up to 80 mm thick.

Cutting ranges are given for two gas set-ups, iQ-Gas O2 and iQ-Gas. For structural steel the recommended range is 0.5 to 60 mm in both cases, with a maximum of 80 mm and piercing at 50 mm. Stainless steel can be cut up to 60 and 80 mm with piercing at 30 and 50 mm, and aluminium up to 60 and 80 mm, with piercing at 40 mm when iQ-Gas O2 is used. For stainless steel and aluminium from 1 to 6 mm, HiFinox technology gives reduced dross. From 6 mm upwards the Ar/H2 Mix works with active gas mixing, and N2 Plasma Cutting cuts these metals with nitrogen up to 60 mm.

Q-Desk displays process and system data in real time, so the operator can see what is happening on the installation and tune settings with purpose. The TorchGuardian series comes as standard, monitoring the torch and its consumables, showing their status and helping to plan replacements. The Q-Torch Auto Change System provides the basis for automation: swapping differently equipped torch heads automatically reduces manual intervention and supports continuous production.

For cut quality there is Contour Cut, which handles contours and holes in structural steel with a diameter-to-thickness ratio of 1:1, and Contour Cut Speed, which cuts contours up to 50% faster with comparable quality. Q-Hole produces holes at a 0.75:1 ratio, ProPierce is designed for piercing thicker metal, and Silent Cut lowers the sound pressure level. Q-Bevel cuts bevels on thicknesses from 6 to 50 mm, and Q-Mark and Q-Notch handle marking and notching.

The source weighs 298 or 318 kg depending on whether it is the iQ 3000 or the iQ 3000 plus. It runs from a 380-400 V, 415-440 V or 440-480 V supply at 50/60 Hz, with a maximum connected load of 72 kVA, a 125 A slow-blow fuse and IP 21S protection. Typical uses for the Kjellberg iQ 3000 are automated cutting systems in mechanical engineering, steel fabrication and series production.

Technical specifications

BrandKjellberg
SeriesiQ-Series
VersioniQ 3000 / iQ 3000 plus
Cutting current at 100% duty cycle (40 °C)20 - 300 A
Marking current at 100% duty cycle (40 °C)5 - 60 A
Structural steel, recommended (iQ-Gas O2 / iQ-Gas)0.5 - 60 mm / 0.5 - 60 mm
Structural steel, maximum (iQ-Gas O2 / iQ-Gas)80 mm / 80 mm
Structural steel, piercing (iQ-Gas O2 / iQ-Gas)50 mm / 50 mm
Stainless steel, maximum (iQ-Gas O2 / iQ-Gas)60 mm / 80 mm
Stainless steel, piercing (iQ-Gas O2 / iQ-Gas)30 mm / 50 mm
Aluminium, maximum (iQ-Gas O2 / iQ-Gas)60 mm / 80 mm
Aluminium, piercing (iQ-Gas O2)40 mm
Weight298/318 kg
Fuse, slow-blow125 A
Max. connected power72 kVA
Protection classIP 21S
Mains voltage380 - 400 V, 50/60 Hz; 415 - 440 V, 50/60 Hz; 440 - 480 V, 50/60 Hz

Request a price and lead time

Kjellberg iQ 3000 plasma cutting power source for automated systems, 300 A. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

What thickness of structural steel does the iQ 3000 cut?

The recommended range is 0.5 to 60 mm, the maximum is 80 mm and the piercing capacity is 50 mm in both gas set-ups.

What kinds of work suit the iQ 3000?

Automated cutting systems in mechanical engineering, steel fabrication and series production. Q-Mark and Q-Notch marking and notching are available, along with Q-Bevel cutting on thicknesses from 6 to 50 mm.

What supply does the iQ 3000 need?

A 380-400 V, 415-440 V or 440-480 V supply at 50/60 Hz, a connected load of up to 72 kVA and a 125 A slow-blow fuse.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides