
Kjellberg FineMarker plasma marking system for CNC machines, 4-25 A
The Kjellberg FineMarker applies marking, notches and centre punches with a plasma torch on CNC thermal cutting machines. It works on argon at 4 to 25 A with a 100% duty cycle, and marking speed runs from 1.5 to 12 m/min.
- Brand
- Kjellberg
- Output current
- 4-25 A
- Duty cycle
- 100%
- Marking gas
- argon
Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.
Description
Parts are often marked out by hand as a separate operation after cutting. The FineMarker from Kjellberg moves that work to an earlier stage: the CNC machine marks and lays out the part directly on the table, using the same plasma torch and driven by the cutting job file. The unit marks automatically, adds notches and centre punches on unalloyed and stainless steel and on primed sheets, including oily and damp surfaces. This removes the unproductive downtime that comes with hand layout.
Plasma marking leaves colour changes on the surface that disappear once the part is painted. If the parameters are changed, the unit switches to notching, which stays visible after painting. Centre punches make later drilling easier and also serve as auxiliary points for subsequent welding.
FineMarker is adapted to CNC machines. It complements oxy-fuel cutting installations, as well as older plasma cutting systems that lack a marking function. The existing table does not need replacing to get part layouts in the same cycle. Marking, notches and centre punches are set in the same control file as the part contour, and the part leaves the table with its marks already in place for drilling and assembly before welding.
The output current of 4 to 25 A at a 100% duty cycle means marking can run continuously across the whole job. The marking gas is argon, and marking speed is 1.5 to 12 m/min. The PB-M25 W torch is liquid-cooled.
The power source is compact, measuring 710 x 400 x 440 mm and weighing 30 kg, and it is placed beside the cutting machine.
Technical specifications
| Brand | Kjellberg |
|---|---|
| Output current | 4-25 A |
| Duty cycle | 100% |
| Marking gas | argon |
| Marking speed | 1.5-12 m/min |
| Plasma torch | PB-M25 W (liquid cooling) |
| Dimensions (D x W x H) | 710 x 400 x 440 mm |
| Weight | 30 kg |
Request a price and lead time
Kjellberg FineMarker plasma marking system for CNC machines, 4-25 A. We reply within one business day.
Or email sales@usk.ua or call 044 339-50-20.
Questions and answers
Can the FineMarker be fitted to an oxy-fuel cutting machine?
The manufacturer says the FineMarker is adapted to CNC machines and complements oxy-fuel cutting installations as well as older plasma cutting systems without a marking function.
Is the marking still visible after painting?
Ordinary plasma marking is not visible after painting, but the notching the unit switches to by changing the parameters remains visible.
Which gas and current are needed?
Marking runs on argon at an output current of 4 to 25 A at a 100% duty cycle.
Similar equipment from other manufacturers






