
Kjellberg CUTFIRE 125 air plasma cutting unit, 20-125 A, 100% duty cycle
Kjellberg CUTFIRE 125 is the highest-output model in the CUTFIRE line, cutting structural and stainless steel and aluminium with compressed air by hand or on a CNC table. Cutting current runs from 20 to 125 A at 100% duty cycle, and structural steel is cut up to 60 mm. It suits workshops, metal fabrication and on-site work.
- Brand
- Kjellberg
- Series
- CUTFIRE
- Power source
- CUTFIRE 125
- Cutting current
- 20 - 125 A
Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.
Description
The Kjellberg CUTFIRE 125 is the highest-output model in the CUTFIRE line, an air plasma system for demanding jobs and thicker metal. The unit works in both hand-held and mechanised modes. Cutting current is 20 to 125 A, and in the recommended range it cuts structural steel up to 40 mm, with a maximum cutting thickness of 60 mm and piercing up to 25 mm. A 100% duty cycle sustains long cutting operations even at high load.
The plasma gas is compressed air and the torch is air cooled. The CUTFIRE 125 cuts structural and stainless steel and aluminium. Material, thickness and cutting mode are selected on a digital display, and the system then sets current, pressure and cutting speed. Operators do not need to consult cutting charts, and a new part is set up more quickly. Air as the plasma gas keeps field work simple, since only a mains connection and a compressed air supply from a compressor are needed.
The CUTFIRE 125 has a CNC interface and a marking function, so it connects to a cutting table and works in mechanised mode. Digital pressure control and built-in process monitoring keep the cut stable. KjellCut 125 and KjellCut 125M torches connect to the source.
The 100% duty cycle applies at 40 °C on a 10-minute cycle. The dimensions are 678 x 390 x 610 mm and the weight is 49 kg. Power comes from a three-phase 3~ 380/400/415/440 V ±10%, 50/60 Hz supply through a 63 A mains fuse, with a maximum connected load of 21.6 kVA and IP 23 protection.
The CUTFIRE 125 is chosen when the metal thickness goes beyond the smaller models in the series and the work calls for both hand cutting and a cutting table. Automatic parameter setting keeps set-up simple even when cutting jobs change often.
Technical specifications
| Brand | Kjellberg |
|---|---|
| Series | CUTFIRE |
| Power source | CUTFIRE 125 |
| Cutting current | 20 - 125 A |
| Duty cycle (40 °C, 10 min) | 100% |
| Structural steel: maximum / recommended / piercing | 60 mm / 40 mm / 25 mm |
| Torch | KjellCut 125, KjellCut 125M |
| Plasma gas | air |
| Torch cooling | air-cooled |
| Dimensions (L x W x H) | 678 x 390 x 610 mm |
| Weight | 49 kg |
| Mains fuse | 63 A |
| Max. connected power | 21.6 kVA |
| Protection class | IP 23 |
| Mains voltage | 3~ 380/400/415/440 V ±10%, 50/60 Hz |
Request a price and lead time
Kjellberg CUTFIRE 125 air plasma cutting unit, 20-125 A, 100% duty cycle. We reply within one business day.
Or email sales@usk.ua or call 044 339-50-20.
Questions and answers
What steel thickness does the CUTFIRE 125 cut?
In the recommended range, structural steel up to 40 mm. The maximum cutting thickness is 60 mm and piercing reaches 25 mm.
Can the CUTFIRE 125 be used on a cutting table?
Yes, it has a CNC interface and a marking function for mechanised cutting on a table. KjellCut 125 or KjellCut 125M torches are connected.
What supply and gas does the CUTFIRE 125 need?
A three-phase 3~ 380/400/415/440 V ±10%, 50/60 Hz supply with a 63 A fuse and up to 21.6 kVA connected load. The plasma gas is compressed air.
Similar equipment from other manufacturers






