International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

Kjellberg CUTFIRE 105 air plasma cutting unit, 20-105 A, 100% duty cycle

Kjellberg CUTFIRE 105 is a high-duty air plasma unit that cuts structural and stainless steel and aluminium with compressed air, manually or on a CNC table. Cutting current runs from 20 to 105 A at 100% duty cycle, and structural steel is cut up to 50 mm. It suits workshops and production areas with heavy use.

Brand
Kjellberg
Series
CUTFIRE
Power source
CUTFIRE 105
Cutting current
20 - 105 A

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

The Kjellberg CUTFIRE 105 is an air plasma system for workshop and production use, rated at a 100% duty cycle. It is built for heavy workloads and runs in both hand-held and mechanised modes. Cutting current is 20 to 105 A, and in the recommended range it cuts structural steel up to 30 mm, with a maximum cutting thickness of 50 mm and piercing up to 20 mm. The 100% duty cycle supports long cutting runs even under intensive use.

Compressed air is the plasma gas and the torch is air cooled. The CUTFIRE 105 cuts structural and stainless steel and aluminium. The operator chooses the material, thickness and cutting mode on a digital display, and the system automatically sets current, pressure and cutting speed. Parameters do not have to be looked up by hand, and new parts are set up faster. Using air as the plasma gas makes work away from the shop straightforward, since only a mains supply and a compressed air feed are required.

With its CNC interface and marking function, the CUTFIRE 105 connects to a cutting table and works mechanised, so it reaches well beyond manual cutting. Digital pressure adjustment and integrated process monitoring hold the cutting conditions steady. The source accepts KjellCut 125 and KjellCut 125M plasma torches, letting one unit serve both hand and machine operations.

The 100% duty cycle applies at 40 °C on a 10-minute cycle. The dimensions are 678 x 390 x 610 mm and the weight is 45 kg. The three-phase supply is 3~ 380/400/415/440 V ±10%, 50/60 Hz, protected by a 32 A mains fuse, with a maximum connected load of 18.9 kVA and IP 23 protection.

The CUTFIRE 105 is typically placed in workshops and production areas where the unit runs for most of a shift: hand cutting, mechanised cutting on a table and CNC work. High cutting output combined with simple controls makes it practical for teams where different operators share one machine.

Technical specifications

BrandKjellberg
SeriesCUTFIRE
Power sourceCUTFIRE 105
Cutting current20 - 105 A
Duty cycle (40 °C, 10 min)100%
Structural steel: maximum / recommended / piercing50 mm / 30 mm / 20 mm
TorchKjellCut 125, KjellCut 125M
Plasma gasair
Torch coolingair-cooled
Dimensions (L x W x H)678 x 390 x 610 mm
Weight45 kg
Mains fuse32 A
Max. connected power18.9 kVA
Protection classIP 23
Mains voltage3~ 380/400/415/440 V ±10%, 50/60 Hz

Request a price and lead time

Kjellberg CUTFIRE 105 air plasma cutting unit, 20-105 A, 100% duty cycle. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

What steel thickness does the CUTFIRE 105 cut?

In the recommended range, structural steel up to 30 mm. The maximum cutting thickness is 50 mm and piercing reaches 20 mm.

Can the CUTFIRE 105 be used on a cutting table?

Yes, it has a CNC interface and a marking function for mechanised cutting on a table, and it takes KjellCut 125 or KjellCut 125M torches.

What supply and gas does the CUTFIRE 105 need?

A three-phase 3~ 380/400/415/440 V ±10%, 50/60 Hz supply with a 32 A fuse and up to 18.9 kVA connected load. The plasma gas is compressed air.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides