International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

Hypertherm Freedom 38 PPA Engine-Driven Plasma Cutting System with Powermax125, 30 to 125 A

Hypertherm Freedom 38 PPA is a fully self-contained plasma system with a diesel generator for cutting and gouging away from the mains. The 38 kW generator, air compressor and Powermax125 unit share one enclosure.

Brand
Hypertherm
Plasma system
Powermax125
Generator, fuel
Diesel, ASTM 975, 1-D and 2-D
Generator, output
480 V 3-PH (40,000 W standby, 36,000 W continuous), 120 V, 1-PH, auxiliary

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

The Freedom 38 PPA suits work where there is no mains supply and no bottled gas. The unit is entirely self-contained: a diesel generator runs all the equipment, and an air compressor and a Powermax125 plasma system sit in the same enclosure, already connected and ready to use. Typical jobs are cutting and gouging during pipeline construction and repair, at plant shutdowns and on other demanding site work away from the grid.

The manufacturer points to three practical advantages. The first is safety, since plasma cutting and gouging replace oxy-fuel cutting and air-arc gouging with carbon electrodes along with their hazards. The second is speed: the unit cuts and gouges any electrically conductive metal faster than oxy-fuel cutting or grinding. The third is lower running cost, because there is no need to rent gas cylinders.

The generator runs on diesel to ASTM 975, 1-D and 2-D, at a constant 1800 rpm. It delivers 480 V three-phase, rated at 40,000 W standby and 36,000 W continuous, plus an auxiliary 120 V single-phase supply. The engine takes 14.8 quarts of oil and a 17 gallon tank, with fuel use of 3.3 GPH at full load and 1.7 GPH at half load. A 750 CCA battery and a 14 V/55 A charging output support starting, while noise is 91.5 dB(A) at 1 m and 77.5 dB(A) at 7 m, with an exhaust gas flow of 353 CFM.

The Powermax125 power source is an inverter. It takes 480/600 V three-phase at 50/60 Hz and delivers 21.9 kW, drawing 31/24 A. Output runs from 30 to 125 A, the rated output voltage is 175 VDC and the open-circuit voltage 320 VDC. It has a 100% duty cycle at 125 A and 480/600 V three-phase at 104°F, and works with clean, dry, oil-free air from the built-in compressor, between 14 and 104°F (-10 to 40°C). Duramax Hyamp torches for the full 125 A serve manual and mechanical cutting and gouging.

The unit measures 36 inches deep, 70 inches wide and 47 inches high to the top of the exhaust, and weighs 2,196 lbs (996 kg) with a full tank. Freedom 38 PPA is supplied as a finished package that is brought to site and started without any connection to the mains.

Technical specifications

BrandHypertherm
Plasma systemPowermax125
Generator, fuelDiesel, ASTM 975, 1-D and 2-D
Generator, output480 V 3-PH (40,000 W standby, 36,000 W continuous), 120 V, 1-PH, auxiliary
Engine speed1800 rpm, constant
Oil capacity14.8 quarts
Fuel tank17 gallons
Fuel consumption3.3 GPH (100%), 1.7 GPH (50%)
Exhaust gas flow353 CFM
Battery750 CCA
Battery charging output14 V/55 A
Min. operating temperature of generator-4°F (-20°C)
Average sound level91.5 dB(A) @ 1 m, 77.5 dB(A) @ 7 m
Dimensions36 in D x 70 in W x 47 in H (to top of exhaust)
Weight with full tank2,196 lbs (996 kg)
Powermax125, input voltage480/600 V, 3-PH, 50/60 Hz
Powermax125, output power21.9 kW
Powermax125, input current @ 21.9 kW480/600 V, 31/24 A
Powermax125, output current30 - 125 A
Powermax125, rated output voltage175 VDC
Powermax125, duty cycle @ 104°F100% @ 125 A, 480/600 V, 3-PH
Powermax125, open circuit voltage320 VDC
Powermax125, gasClean, dry, oil-free air
Powermax125, power supply typeInverter
Powermax125, operating temperature14 to 104°F (-10 to 40°C)

Request a price and lead time

Hypertherm Freedom 38 PPA Engine-Driven Plasma Cutting System with Powermax125, 30 to 125 A. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

What is needed to run the Freedom 38 PPA on site?

Only diesel fuel. The 38 kW generator, compressor and Powermax125 sit in one enclosure, so no mains supply or bottled gas is required.

What current and duty cycle does the plasma unit give?

The Powermax125 gives 30 to 125 A, with a 100% duty cycle at 125 A at 104°F.

Which jobs is the unit suited to?

Cutting and gouging of any electrically conductive metal in construction and pipeline repair, at plant shutdowns and in other remote locations.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides