
ALFA IN SVS-160 0.2 m machine plasma torch for CNC, 30–160 A
ALFA IN SVS-160 with a 0.2 m outlet is fitted to the gantry or carriage of a CNC plasma cutting machine. It runs on air or nitrogen, starts its arc without HF and holds 160 A at a 60% duty cycle.
- Brand
- ALFA IN
- Country of manufacture
- Czech Republic
- Type
- machine plasma torch
- Outlet length
- 0.2 m
Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.
Description
Part 7260 differs from the hand torches of the SV series by its short outlet: the body is only 0.2 m long, and beyond that the torch joins a coaxial cable of the SV-FIT system. For that connection the maker offers 6.7 m (code 7076) and 9.0 m (code 7103) cables with a 6-pin plug, plus a 6.0 m extension (code 7088) that is common to the SV-105, SV-125 and SV-160. On the order sheet the item is described as a coaxial machine torch for SVAROG CNC installations.
The cutting current range is 30–160 A, and at a 60% duty cycle the torch runs at 160 A. Cooling is by gas, with air or N2 as the working gas. Pressure at cutting is 5.0–6.0 bar and for plasma gouging 3.0–3.5 bar, with a gas flow of 420 l/min and a post-flow of 45 s after the arc goes out. The arc starts without high-frequency discharge, so there is no HF interference from ignition near the CNC electronics and height sensors.
The maker requires a three-way solenoid valve in the gas line. The torch meets IEC 60974-7 requirements for welding and cutting torches.
The starter kit 7261 for the machine SVS-160 contains nozzles for 45 A (6017), 65 A (6018), 85 A (6019) and 125 A (6021), electrodes 6016, a nozzle body for 45–85 A (6023) and a machine shield cap for 45–85 A (6027). Ordered separately are the SVS-160 Svarog CNC torch head (7282), sealing rings 6013 and a glass-fibre positioning tube 6014, by which the torch is clamped in the machine holder.
ALFA IN, a Czech maker of welding and cutting equipment, lists this item among torches for machine cutting. The torch suits cutting sheet steel, stainless steel and non-ferrous metals on gantry and cantilever machines, where it follows a programme and the consumables are swapped as a set for the required current.
Technical specifications
| Brand | ALFA IN |
|---|---|
| Country of manufacture | Czech Republic |
| Type | machine plasma torch |
| Outlet length | 0.2 m |
| Cutting current range | 30-160 A |
| Current at 60% duty cycle | 160 A |
| Cooling | gas |
| Gas | Air/N2 |
| Gas pressure, cutting | 5.0-6.0 bar |
| Gas pressure, gouging | 3.0-3.5 bar |
| Gas flow | 420 l/min |
| Post-flow | 45 s |
| Arc starting | without HF |
| Standard | IEC 60974-7 |
| Compatible cables | 7076 (6.7 m, 6 PIN), 7103 (9.0 m, 6 PIN), 7088 (extension 6.0 m) |
| Starter kit | 7261 |
Part numbers
Show all part numbers (1)
7260
Request a price and lead time
ALFA IN SVS-160 0.2 m machine plasma torch for CNC, 30–160 A. We reply within one business day.
Or email sales@usk.ua or call 044 339-50-20.
Questions and answers
What current does the SVS-160 torch deliver?
The cutting range is 30–160 A, and at a 60% duty cycle the torch runs at 160 A.
What gas and pressure are needed for cutting?
Air or N2 as working gas, 5.0–6.0 bar for cutting, 3.0–3.5 bar for plasma gouging, and a flow of 420 l/min.
Is a separate cable needed for the torch?
Yes, the outlet is 0.2 m, and it connects to the source with a 6.7 m (7076) or 9.0 m (7103) coaxial cable with a 6-pin plug.
Similar equipment from other manufacturers






