International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

ALFA IN SVH-125 hand torch with 15° head, 40–150 A, SV-FIT system

ALFA IN SVH-125 hand plasma torch has its head set at 15° on the SV-FIT system. It is gas cooled, covers 40–150 A and carries 125 A at a 60% duty cycle on air or nitrogen, with an arc that starts without HF. It is built for hand cutting and gouging of metal.

Brand
ALFA IN
Country of manufacture
Czech Republic
Type
hand plasma torch
Head angle
15°

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

The SVH-125 with a 15° head, code 7040, differs from the base SVH-125 (code 7039) in the angle of its head, which sits at 15° to the handle. It is built on the SV-FIT system from ALFA IN, where the torch body can be swapped for versions at 15, 75 or 90 degrees. The rating can be changed too: the SVH-105 uses noticeably less compressed air than the SVH-125. The standard short handle comes off easily, and a rigid extended handle of up to 130 cm can take its place, with a further 6.0 m of cable.

Current runs from 40 to 150 A, and at a 60% duty cycle the torch carries 125 A. Compressed air or nitrogen (Air/N2) is used at 5.0–5.5 bar for cutting and 3.5–4.5 bar for gouging, with a flow of 295 l/min and a 45 s post-flow. The arc is struck without HF, and the design follows IEC 60974-7.

Coaxial cable reaches the power source in lengths of 6.7 m (code 7076, listed on the page also as 7076-1 in the 7-pin version) or 9.0 m (code 7103), and a 6.0 m extension carries code 7088. For a first start-up, starter kit 7113 has two 105 A nozzles, five 125 A nozzles, two each of 65 A and 85 A, ten electrodes for 45–125 A, a shield and cap for 45–85 A and a gas distributor ring for 45–85 A.

Consumables are picked by current and task. Nozzles come as 45 A, a precision-cut 45 A version, 65 A, 85 A, 105 A and 125 A, plus gouging nozzles for 65–85 A, 100 A and 125 A, and extended nozzles with a longer electrode for 65 A, 85 A, 105 A and 125 A. Shields and caps cover 45–85 A, 100–125 A and an extended 65–125 A version, alongside a 45 A deflector and eco or Long life rings.

Hard-to-reach spots call for extra-long consumables, used in dismantling, on car and truck bodies and in shipyards. With them, a 45 A torch cuts up to 8 mm and a 70 A torch up to 12.5 mm, and the complete 70 A set for the SVH-125 carries code 7174. The jig 5872 and circle guide 7175 steer the torch along a straight, angled or round path.

Technical specifications

BrandALFA IN
Country of manufactureCzech Republic
Typehand plasma torch
Head angle15°
SystemSV-FIT
Coolinggas
Current range40 - 150A
Current at 60% duty cycle125A
GasAir/N2
Pressure, cutting5.0–5.5 bar
Pressure, gouging3.5–4.5 bar
Gas flow295 l/min
Post-flow45s
Arc startingwithout HF
StandardIEC 60974-7
Cables7076 (6.7 m), 7103 (9.0 m), extension 7088 (6.0 m)
Starter kit7113

Part numbers

Show all part numbers (1)

7040

Request a price and lead time

ALFA IN SVH-125 hand torch with 15° head, 40–150 A, SV-FIT system. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

What current does the SVH-125 15° torch deliver?

It runs from 40 to 150 A, and at a 60% duty cycle it carries 125 A with gas cooling.

Can the head or handle of the SVH-125 be changed?

Yes, the SV-FIT system allows body changes to 15, 75 or 90 degrees and a longer handle up to 130 cm.

What thickness can the SVH-125 cut with extended consumables?

Up to 8 mm at 45 A and up to 12.5 mm at 70 A; the full 70 A set for the SVH-125 has code 7174.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides