
ALFA IN SVH-105 75° 85A hand plasma torch with 7 PIN connector
The ALFA IN SVH-105 75° 85A is set up for mainly medium-current work on plasma cutters with a 7 PIN connector. The gas-cooled hand torch cuts and gouges in air or nitrogen.
- Brand
- ALFA IN
- Country of manufacturer
- Czech Republic
- Type
- hand plasma torch
- Version
- 85 A
Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.
Description
Article 7037-8 is the SVH-105 with a 75° head set up for 85 A, which is the middle of the torch's working range. For that current the range includes 80–90 A nozzles (7000), an 85–105 A nozzle (7072), an 85–105 A eco nozzle body (7071) and an 85–105 A swirl ring (6998), plus an extended 85 A nozzle (7158) for deep positions. The version suits a machine that cuts medium-thickness sheet all the time and does not need full output.
The body is the same across the SVH-105 range: gas cooled, current from 20 to 105 A, and 105 A at 60% duty cycle. The working gas is air or N2. Cutting needs 5.0–5.5 bar and gouging 3.5–4.5 bar, with a flow of 240 l/min, and after the arc goes out the gas purges the torch for 45 seconds. The arc ignites without HF, and the torch is built to IEC 60974-7.
The torch connects to the source through a 7-pin coaxial cable: standard 6.7 m (7076-1), longer 9.0 m (7103-1) or a 6.0 m extension (7088-3). The 85–105 A starter kit 7112 holds 85 A and 105 A nozzles, electrodes 5830, nozzle 7072, nozzle body 7071 and swirl ring 6998, so the torch can run at 85 A or at full current.
For finer metal the same torch takes 20–50 A nozzles (5832) or 60–70 A nozzles (5937), with a 20–70 A nozzle (7073), a 20–70 A eco nozzle body (7070) and a 20–70 A swirl ring (5936). The 20–105 A electrode (5830) stays in place. For gouging there are 45 A, 70 A and 105 A nozzles (7074, 7075, 7153) and nozzle 7154, a circle-cutting compass (7175) for round cuts and a guide carriage (5872) for bevels. The maker is ALFA IN, Czech Republic.
Technical specifications
| Brand | ALFA IN |
|---|---|
| Country of manufacturer | Czech Republic |
| Type | hand plasma torch |
| Version | 85 A |
| Head angle | 75° |
| Connector | 7 PIN |
| Current range | 20–105 A |
| Rated current at 60% duty cycle | 105 A |
| Cooling | gas |
| Gas | air or N2 |
| Gas pressure, cutting | 5.0–5.5 bar |
| Gas pressure, gouging | 3.5–4.5 bar |
| Gas flow | 240 l/min |
| Post-cut purge | 45 s |
| Arc ignition | without HF |
| Standard | IEC 60974-7 |
| Compatible cables | 7076-1 (6.7 m), 7103-1 (9.0 m), 7088-3 (6.0 m extension) |
| Starter kit | 7112 (85–105 A) |
Part numbers
Show all part numbers (1)
7037-8
Request a price and lead time
ALFA IN SVH-105 75° 85A hand plasma torch with 7 PIN connector. We reply within one business day.
Or email sales@usk.ua or call 044 339-50-20.
Questions and answers
Which consumables are needed for the 85 A current?
An 80–90 A nozzle (7000), an 85–105 A nozzle (7072), the nozzle body 7071 and an 85–105 A swirl ring (6998).
Can this torch be used at 105 A?
Yes. The SVH-105 range runs from 20 to 105 A, and for full current a 95–105 A nozzle (7001) is fitted.
What air does the torch need?
Compressed air or N2 at 5.0–5.5 bar for cutting, with a flow of 240 l/min.
Similar equipment from other manufacturers






