
ALFA IN SVH-105 75° 70A hand plasma torch with 7 PIN connector
The ALFA IN SVH-105 75° 70A is set up for the lower half of the torch's current range and fits plasma cutters with a 7 PIN connector. The gas-cooled hand torch cuts and gouges thin and medium sheet in air or nitrogen.
- Brand
- ALFA IN
- Country of manufacturer
- Czech Republic
- Type
- hand plasma torch
- Version
- 70 A
Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.
Description
Article 7037-9 is built for 70 A, so it runs the lower-current group of consumables: a 60–70 A nozzle (5937), a 20–70 A nozzle (7073), a 20–70 A eco nozzle body (7070) and a 20–70 A swirl ring (5936). For deep positions there is an extended 70 A nozzle (7157), and for gouging a 70 A nozzle (7075). This version suits smaller machines, or work where thin metal dominates and full current is rarely needed.
The torch itself is no different from other SVH-105 models. It is gas cooled, covers 20 to 105 A and holds 105 A at 60% duty cycle. The gas is air or N2: cutting pressure 5.0–5.5 bar, gouging 3.5–4.5 bar, flow 240 l/min, and gas purges the torch for 45 seconds after cutting. The arc ignites without HF, and the design conforms to IEC 60974-7.
Connection to the source is by a 7-pin coaxial cable, ordered separately: 6.7 m (7076-1), 9.0 m (7103-1) or a 6.0 m extension (7088-3). The 20–105 A electrode (5830) is common to all currents, so moving to a higher current means changing only the nozzle, the nozzle body and the swirl ring.
For 85–105 A on the same torch, use 80–90 A (7000) or 95–105 A (7001) nozzles with the 85–105 A nozzle (7072), nozzle body 7071 and swirl ring 6998; the starter kit 7112 contains this group. For the thinnest metal there is a 20–50 A nozzle (5832) and an extended 20–50 A nozzle (7156). Gouging at other currents uses 45 A (7074) and 105 A (7153) nozzles with a 20–105 A nozzle (7154). The maker offers a circle-cutting compass (7175) for round cuts and a guide carriage (5872) for bevels. The maker is ALFA IN, Czech Republic.
Technical specifications
| Brand | ALFA IN |
|---|---|
| Country of manufacturer | Czech Republic |
| Type | hand plasma torch |
| Version | 70 A |
| Head angle | 75° |
| Connector | 7 PIN |
| Current range | 20–105 A |
| Rated current at 60% duty cycle | 105 A |
| Cooling | gas |
| Gas | air or N2 |
| Gas pressure, cutting | 5.0–5.5 bar |
| Gas pressure, gouging | 3.5–4.5 bar |
| Gas flow | 240 l/min |
| Post-cut purge | 45 s |
| Arc ignition | without HF |
| Standard | IEC 60974-7 |
| Compatible cables | 7076-1 (6.7 m), 7103-1 (9.0 m), 7088-3 (6.0 m extension) |
| Consumables for 70 A | 60–70 A nozzle (5937), 20–70 A nozzle (7073), nozzle body 7070, swirl ring 5936 |
Part numbers
Show all part numbers (1)
7037-9
Request a price and lead time
ALFA IN SVH-105 75° 70A hand plasma torch with 7 PIN connector. We reply within one business day.
Or email sales@usk.ua or call 044 339-50-20.
Questions and answers
Which nozzles fit the 70 A version?
The 60–70 A nozzle (5937) with the 20–70 A nozzle (7073) and swirl ring (5936); for gouging, the 70 A nozzle (7075).
Can this torch be used with a 105 A source?
Yes. The torch covers 20–105 A, and for full current a 95–105 A nozzle (7001) with the 85–105 A nozzle (7072) is fitted.
Does the electrode change with the current?
No. The 20–105 A electrode (5830) is common to the whole range, and only the nozzle, nozzle body and swirl ring are changed.
Similar equipment from other manufacturers






