
ALFA IN SVH-105 75° 105 A Manual Plasma Torch with 7-Pin Connector
The ALFA IN SVH-105 in its 105 A version is rated for the full current of the torch and has a 75° head with a 7-pin connector. The gas-cooled torch runs on air or nitrogen and is used for hand cutting and gouging.
- Brand
- ALFA IN
- Country of manufacture
- Czech Republic
- Type
- manual plasma torch
- Version
- 105 A
Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.
Description
This version (code 7037-4) is set to the upper limit of the SVH-105 torch, which is 105 A. For that current the manufacturer offers 95–105A nozzles (7001), an 85–105A shield (7072), an eco nozzle body 85–105A (7071) and an 85–105A swirl ring (6998), plus a 105A nozzle (7153) for gouging. The head is angled at 75° from the handle, as on a classic hand torch. This build suits work where the machine runs at full power for long periods on thick plate.
The SVH-105 is gas-cooled and works in the 20–105A range, holding 105 A at 60% duty cycle according to the manufacturer. It uses air or N2 at 5.0–5.5 bar for cutting and 3.5–4.5 bar for gouging, with a gas flow of 240 l/min and a post-flow of 45 s. The arc is struck without HF, and the torch complies with IEC 60974-7.
The torch connects with a 7-pin coaxial cable: 6.7 m (7076-1) or 9.0 m (7103-1), and for a longer reach there is a 6.0 m extension (7088-3). Start kit 7112 for 85–105A includes several 105A and 85A nozzles, a set of 5830 electrodes, a shield, a nozzle body and a swirl ring.
If the machine is set to a lower current, the same torch takes 20–50A (5832), 60–70A (5937) or 80–90A (7000) nozzles with the matching shield and swirl ring 20–70A (7073, 5936). Electrode 5830 covers the whole 20–105A range. For deep recesses there are extended nozzles for 20–50A, 70A, 85A and 105A with extended electrode 7155, gouging nozzles for 45A and 70A (7074, 7075) and a 20–105A gouging shield (7154). The SVH-105 range also includes 80 cm or 130 cm extended-handle versions with a 90° or 15° head (7094, 7095, 7096, 7097) for cutting on vertical and horizontal structures in hard-to-reach places. A circle cutter (7175) handles round cuts and a bevel guide trolley (5872) handles bevels. The torch is made by ALFA IN in the Czech Republic.
Technical specifications
| Brand | ALFA IN |
|---|---|
| Country of manufacture | Czech Republic |
| Type | manual plasma torch |
| Version | 105 A |
| Head angle | 75° |
| Connector | 7-pin |
| Current range | 20 - 105 A |
| Current at 60% duty cycle | 105 A |
| Cooling | gas |
| Gas | air / N2 |
| Gas pressure, cutting | 5.0-5.5 bar |
| Gas pressure, gouging | 3.5-4.5 bar |
| Gas flow | 240 l/min |
| Post-flow after cutting | 45 s |
| Arc ignition | without HF |
| Standard | IEC 60974-7 |
| Compatible cables | 7076-1 (6.7 m), 7103-1 (9.0 m), 7088-3 (6.0 m extension) |
| Start kit | 7112 (85-105A) |
Part numbers
Show all part numbers (1)
7037-4
Request a price and lead time
ALFA IN SVH-105 75° 105 A Manual Plasma Torch with 7-Pin Connector. We reply within one business day.
Or email sales@usk.ua or call 044 339-50-20.
Questions and answers
Which nozzles go on the SVH-105 for 105 A?
The 95–105A nozzle (7001) with the 85–105A shield (7072) and swirl ring (6998), and for gouging the 105A nozzle (7153).
What gas pressure does the torch need?
Cutting pressure of 5.0–5.5 bar and gouging pressure of 3.5–4.5 bar, with a gas flow of 240 l/min.
Can this torch be used at a lower current?
Yes, the torch works in the 20–105 A range, and nozzles for 20–50 A, 60–70 A or 80–90 A can be fitted with the matching shield and swirl ring.
Similar equipment from other manufacturers






