
ALFA IN SVH-105 15° Manual Plasma Torch with 85A Cartridge and 7-Pin Connector
The ALFA IN SVH-105 with a 15° head and 85A cartridge is fitted to plasma cutters that use a 7-pin connector. The gas-cooled torch cuts in air or nitrogen and handles both cutting and gouging by hand.
- Brand
- ALFA IN
- Country of manufacture
- Czech Republic
- Type
- manual plasma torch
- Head angle
- 15°
Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.
Description
Compared with the standard manual SVH-105, this version (code 7038-3) has a head angled only 15° from the handle axis, so the torch is almost straight, and its consumables are fitted as an 85A cartridge. A straight torch is easier to feed into recesses, cut-outs and the gaps between structural ribs, where an angled head will not fit.
The basic SVH-105 figures are a current range of 20–105 A, with the torch rated at 105 A at 60% duty cycle. Cooling is by gas, using air or N2. Cutting pressure is 5.0–5.5 bar, gouging pressure 3.5–4.5 bar, and gas flow 240 l/min, with post-flow of 45 s after the arc goes out. The arc is struck without HF, and the torch complies with IEC 60974-7.
The torch connects to the power source through a coaxial cable with a 7-pin plug: 6.7 m (7076-1), 9.0 m (7103-1) or a 6.0 m extension (7088-3). Start kit 7112 for 85–105A currents contains a 105A nozzle (7001) and an 85A nozzle (7000), electrodes 5830, an 85–105A nozzle (7072), a nozzle body (7071) and an 85–105A swirl ring (6998).
For other currents the manufacturer offers nozzles for 20–50A (5832), 60–70A (5937), 80–90A (7000) and 95–105A (7001), gouging nozzles for 45A (7074), 70A (7075) and 105A (7153), and extended nozzles for 20–50A, 70A, 85A and 105A (7156–7159) with an extended electrode 7155. Standard nozzles come as 20–70A (7073) and 85–105A (7072), with long versions (7107, 7108) and a 20–105A gouging version (7154). For straight, circular and bevel cutting there is a circle cutter for SVH-105 and 125 (7175) and a bevel guide trolley (5872). For hard-to-reach work on vertical and horizontal structures, the SVH-105 is also available with an 80 cm or 130 cm extended handle, including a 15° head version (codes 7096 and 7097). The torch is made by ALFA IN in the Czech Republic.
Technical specifications
| Brand | ALFA IN |
|---|---|
| Country of manufacture | Czech Republic |
| Type | manual plasma torch |
| Head angle | 15° |
| Consumable part | 85A cartridge |
| Connector | 7-pin |
| Current range | 20 - 105 A |
| Current at 60% duty cycle | 105 A |
| Cooling | gas |
| Gas | air / N2 |
| Gas pressure, cutting | 5.0-5.5 bar |
| Gas pressure, gouging | 3.5-4.5 bar |
| Gas flow | 240 l/min |
| Post-flow after cutting | 45 s |
| Arc ignition | without HF |
| Standard | IEC 60974-7 |
| Compatible cables | 7076-1 (6.7 m), 7103-1 (9.0 m), 7088-3 (6.0 m extension) |
| Start kit | 7112 (85-105A) |
Part numbers
Show all part numbers (1)
7038-3
Request a price and lead time
ALFA IN SVH-105 15° Manual Plasma Torch with 85A Cartridge and 7-Pin Connector. We reply within one business day.
Or email sales@usk.ua or call 044 339-50-20.
Questions and answers
How does the SVH-105 15° differ from the standard SVH-105?
Its head is angled only 15°, so the torch is almost straight, and its consumables are fitted as an 85A cartridge.
Which gas and pressures does the torch need?
Air or N2, with cutting pressure of 5.0–5.5 bar, gouging pressure of 3.5–4.5 bar and a gas flow of 240 l/min.
Is the cable supplied with the torch?
No, the 7-pin coaxial cable is ordered separately: 6.7 m (7076-1), 9.0 m (7103-1) or a 6.0 m extension (7088-3).
Similar equipment from other manufacturers






