
ALFA IN SVAROG 125 PLASMA SYN with Trolley, Plasma Cutter with SVH-125 Torch
The ALFA IN SVAROG 125 PLASMA SYN cuts carbon and high-alloy steel as well as non-ferrous metals using compressed air, with no special gases. The trolley kit comes with an SVH-125 hand torch, coaxial cable and earth cable, and is set up for manual cutting of thick plate.
- Brand
- ALFA IN
- Country of manufacture
- Czech Republic
- Type
- plasma cutting unit with trolley, manual kit
- Quality cutting of carbon steel
- up to 50 mm
Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.
Description
This is the larger model in the SVAROG PLASMA SYN line. Compared with the SVAROG 105 PLASMA SYN, it cuts carbon steel to quality up to 50 mm and productively up to 25 mm, and where edge quality matters less it separates metal up to 55 mm. Item 5.0324-1 is a manual kit that includes the SVH-125 torch, coaxial cable, earth cable and trolley. A CNC version, the SVAROG 125 PLASMA SYN CNC, is described in the same manual for machine installations.
The SYN suffix means a proportional valve is fitted. It allows the working gas pressure to be set precisely, and the display shows the pressure value. Pressure and flow can be matched to the current and the consumable parts, which affects how accurate the cut is.
The plasma jet cuts quickly, leaves a small heat-affected zone and causes less distortion than gas cutting. The unit works with carbon and high-alloy stainless steels and with non-ferrous metals, and no special gases are needed.
For the SVS-125 machine torch used with the CNC versions, the manufacturer gives a maximum air inlet pressure of 8.5 bar, a current of 125 A at 60% duty cycle, a working pressure of 5.0–5.5 bar for cutting and 4.0–4.5 bar for gouging, and air use of 285 l/min at 105 A and 295 l/min at 125 A. Arc ignition is pneumatic-mechanical. The SV-FIT system lets the standard 9 m torch be extended with a 6 m or 12 m extension cable (7088).
Accessories include a 6.7 m coaxial cable for the SVS/SVH-105, 125 and 160 torches (7076-1), a spare SVH-125 75° 125 A 7-pin hand torch (7039-1), a 700 l cyclone water separator (7704) and a 567 l microfilter (7707) with automatic condensate drain. The manual covers the control panel, manual and machine cutting, causes of poor cut quality, maintenance and error messages. The unit is made by ALFA IN in the Czech Republic.
Technical specifications
| Brand | ALFA IN |
|---|---|
| Country of manufacture | Czech Republic |
| Type | plasma cutting unit with trolley, manual kit |
| Quality cutting of carbon steel | up to 50 mm |
| Productive cutting of carbon steel | up to 25 mm |
| Metal separation | up to 55 mm |
| Materials | carbon and high-alloy stainless steels, non-ferrous metals |
| Gas pressure adjustment | proportional valve, shown on display |
| Working gas | compressed air |
| Supplied with | SVH-125 torch, coaxial cable, earth cable, trolley |
| Machine torch SVS-125, current at 60% duty cycle | 125 A |
| Maximum air inlet pressure | 8.5 bar |
| Working pressure, cutting | 5.0-5.5 bar |
| Working pressure, gouging | 4.0-4.5 bar |
| Air consumption | 285 l/min at 105 A; 295 l/min at 125 A |
Part numbers
Show all part numbers (1)
5.0324-1
Request a price and lead time
ALFA IN SVAROG 125 PLASMA SYN with Trolley, Plasma Cutter with SVH-125 Torch. We reply within one business day.
Or email sales@usk.ua or call 044 339-50-20.
Questions and answers
How thick a steel does the SVAROG 125 PLASMA SYN cut?
Quality cutting of carbon steel up to 50 mm, productive cutting up to 25 mm and separation up to 55 mm where edge quality matters less.
What comes in the 5.0324-1 kit?
The SVH-125 hand torch, coaxial cable, earth cable and trolley.
How does the SVAROG 125 PLASMA SYN differ from the 105 model?
It cuts thicker metal: quality cutting of carbon steel up to 50 mm and separation up to 55 mm, where the SVAROG 105 PLASMA SYN has lower limits.
Similar equipment from other manufacturers






