
ALFA IN SVAROG 125 PLASMA CNC with trolley, CNC plasma power source
ALFA IN SVAROG 125 PLASMA CNC is a current source for gantry and cantilever plasma cutting machines under CNC control. Supplied on a trolley, it cuts carbon and high-alloy steel and non-ferrous metals on compressed air.
- Brand
- ALFA IN
- Country of manufacture
- Czech Republic
- Type
- CNC plasma cutting power source with trolley
- Quality cut, carbon steel
- up to 50 mm
Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.
Description
Code 5.0329 is the CNC version of the SVAROG 125 PLASMA, listed in the ALFA IN catalogue among plasma sources for machine cutting. It is meant for work under programme control rather than as a hand kit, and it is supplied together with a trolley. The maker gives separate cutting-parameter tables for its SVS-105, SVS-125 and SVS-160 machine torches, and the manual for the SVAROG 125 PLASMA (CNC) has a section on CNC machine cutting along with a torch connection diagram.
Quality cutting of carbon steel reaches 50 mm, and productive cutting 25 mm. Where the edge requirements are lower, the unit separates metal up to 55 mm thick. The plasma jet cuts quickly, the heat-affected zone stays small and the sheet distorts less from heat. The method suits carbon and high-alloy stainless steels and non-ferrous metals and needs no special gases.
For the SVS-125 machine torch the maker specifies a maximum air inlet pressure of 8.5 bar and a current of 125 A at a 60% duty cycle. Working pressure is 5.0–5.5 bar for cutting and 4.0–4.5 bar for gouging, with air flow of 285 l/min at 105 A and 295 l/min at 125 A, and arc starting is pneumatic-mechanical. The SV-FIT system lets the standard 9 m torch be extended by 6 m or 12 m with the 7088 extension cable.
The manual describes operation from a generator, the requirements for the compressed air source, connection to a central air network, and a water separator with an air filter as a preliminary stage. Accessories offered for the unit include a 700 l cyclone separator (7704) and a 567 l microfilter (7707) with automatic condensate drain. For CNC there is a remote control diagram and a voltage divider with DIP switches.
Consumables last roughly 1 to 3 hours of arc time, depending on thickness, cut length, air quality and the start method, whether from the edge or by piercing. In machine cutting the nozzle is changed together with the electrode. ALFA IN, a Czech maker, designs this version for serial sheet cutting on CNC installations.
Technical specifications
| Brand | ALFA IN |
|---|---|
| Country of manufacture | Czech Republic |
| Type | CNC plasma cutting power source with trolley |
| Quality cut, carbon steel | up to 50 mm |
| Productive cut, carbon steel | up to 25 mm |
| Metal separation | up to 55 mm |
| Materials | carbon and high-alloy stainless steels, non-ferrous metals |
| Working gas | compressed air |
| Compatible machine torches | SVS-105, SVS-125, SVS-160 |
| SVS-125 torch, current at 60% duty cycle | 125 A |
| Maximum air inlet pressure | 8.5 bar |
| Working pressure, cutting | 5.0-5.5 bar |
| Working pressure, gouging | 4.0-4.5 bar |
| Air flow | 285 l/min at 105 A; 295 l/min at 125 A |
| Arc starting | pneumatic-mechanical |
Part numbers
Show all part numbers (1)
5.0329
Request a price and lead time
ALFA IN SVAROG 125 PLASMA CNC with trolley, CNC plasma power source. We reply within one business day.
Or email sales@usk.ua or call 044 339-50-20.
Questions and answers
What thickness of steel does the SVAROG 125 PLASMA CNC cut?
Quality cuts in carbon steel up to 50 mm, productive cuts up to 25 mm, and separation up to 55 mm where edge requirements are lower.
Which machine torches suit the unit?
The maker gives cutting-parameter tables for the SVS-105, SVS-125 and SVS-160 torches; the SVS-125 is rated at 125 A at a 60% duty cycle.
What air supply does the unit need?
A maximum inlet pressure of 8.5 bar, a working pressure of 5.0–5.5 bar for cutting and a flow of 285–295 l/min; a water separator and filter are recommended.
Similar equipment from other manufacturers






