International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

ALFA IN SVAROG 105 PLASMA SYN with Trolley, 20–105 A, 3 x 400 V Plasma Cutter

The ALFA IN SVAROG 105 PLASMA SYN runs from a three-phase 3 x 400 V supply and cuts carbon and stainless steel, aluminium and copper using compressed air. The trolley-mounted kit with the SVH-105 hand torch and earth clamp is intended for manual cutting in the workshop.

Brand
ALFA IN
Country of manufacture
Czech Republic
Type
inverter plasma cutting unit with trolley
Mains voltage
3 x 400 V / 50-60 Hz

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

The SYN version is set apart by its proportional valve, which lets the operator set the working gas pressure precisely and shows the value on the display. Pressure and flow can be tuned to a specific current, which gives a sharper cut. Item 5.0320-1 is supplied for manual cutting and includes the SVH-105 torch with a 75° head and a 6.7 m coaxial cable (codes 7037-3 and 7076-1), an earth cable with clamp and the trolley. For machine cutting, the SVAROG 105 PLASMA CNC (5.0328-1) is sold without a torch, and the SVS-105 0.2 m machine torch (6990-3) is ordered separately.

The unit draws power from 3 x 400 V, 50–60 Hz mains, and its cutting current is adjustable smoothly from 20 to 105 A. According to the manufacturer's table, the rated output is 105 A at 60% duty cycle and 95 (105) A at 100% duty cycle, with a 32 (40) A mains fuse and an open-circuit voltage of 330 V. The enclosure is rated IP 23 S, efficiency is 87%, and idle power draw is 25 W.

Quality cutting reaches 45 mm in carbon steel, productive cutting 22 mm, and edge-start separation up to 50 mm, with a maximum piercing thickness of 32 mm. For quality cuts the figures are 45 mm in fine-grained steel, 40 mm in stainless steel, 30 mm in aluminium and 25 mm in copper. Productive cutting speeds are 5.09 m/min at 6 mm, 2.06 m/min at 12 mm, 0.58 m/min at 25 mm, 0.31 m/min at 32 mm and 0.21 m/min at 40 mm. No special gases are needed because the unit cuts with air.

Air pressure at the inlet may reach 8.5 bar, the working pressure is 5.0–5.5 bar for cutting and 4.8 bar for gouging with the 6.7 m torch, and air use is 240 l/min at 105 A. Arc ignition is pneumatic-mechanical, and the unit works at ambient temperatures from -10 to +40 °C, up to 90% relative humidity and altitudes up to 1000 m. Optional extras include a 6.0 m extension cable (7088), a 9.0 m cable (7103), a start kit for the SVH-105 (7112), an AT 1000 air filter (5302) with cartridge (5303) and filter kit (5304), and water separators (7704, 7707, 6078). ALFA IN builds the machine in the Czech Republic, and it meets ČSN EN IEC 60974-1 and ČSN EN 60974-10 class A.

Technical specifications

BrandALFA IN
Country of manufactureCzech Republic
Typeinverter plasma cutting unit with trolley
Mains voltage3 x 400 V / 50-60 Hz
Cutting current20 - 105 A
Current at 60% duty cycle105 A
Current at 100% duty cycle95 (105) A
Open-circuit voltage U20330 V
Mains fuse32 (40) A
Maximum effective current I1eff31.9 (36.7) A
Protection classIP 23 S
Efficiency87%
Idle power P1025 W
Dimensions (w x l x h)377 x 802 x 621 mm
Weight47.7 kg
Quality cutting of carbon steelup to 45 mm
Productive cuttingup to 22 mm
Separation (edge start)up to 50 mm
Maximum piercing32 mm
Quality cut by materialfine-grained steel 45 mm; stainless steel 40 mm; aluminium 30 mm; copper 25 mm
Maximum air inlet pressure8.5 bar
Working pressure, cutting5.0 - 5.5 bar
Working pressure, gouging4.8 bar
Air consumption at 105 A240 l/min
Arc ignitionpneumatic-mechanical
Current controlsmooth
Operating conditions-10 ÷ +40 °C, humidity up to 90%, altitude up to 1000 m
StandardsČSN EN IEC 60974-1, ČSN EN 60974-10 cl. A
Package 5.0320-1SVH-105 75° torch with 6.7 m cable (7037-3 + 7076-1), earth cable, trolley

Part numbers

Show all part numbers (2)

5.0320-1, 5.0328-1

Request a price and lead time

ALFA IN SVAROG 105 PLASMA SYN with Trolley, 20–105 A, 3 x 400 V Plasma Cutter. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

How thick a steel does the SVAROG 105 PLASMA SYN cut?

Quality cutting of carbon steel up to 45 mm, productive cutting up to 22 mm and edge-start separation up to 50 mm. Stainless steel is cut to quality up to 40 mm and aluminium up to 30 mm.

What power supply does the machine need?

A three-phase mains supply of 3 x 400 V / 50-60 Hz, with a 32 (40) A fuse according to the manufacturer's table.

Can the unit be used on a CNC table?

Yes, for machine cutting there is the SVAROG 105 PLASMA CNC (5.0328-1), which takes the SVS-105 0.2 m machine torch (6990-3) ordered separately.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides