
ALFA IN SVAROG 105 PLASMA CNC with trolley, CNC plasma source up to 45 mm
ALFA IN SVAROG 105 PLASMA CNC comes with a trolley for cutting on CNC tables and by hand. Quality cutting of carbon steel runs to 45 mm, productive cutting to 22 mm, and metal separation to 50 mm. A proportional gas pressure valve and remote current control from the machine complete the unit.
- Brand
- ALFA IN
- Country of manufacture
- Czech Republic
- Type
- plasma cutting power source for CNC and hand cutting
- Supply
- with trolley
Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.
Description
The SVAROG 105 PLASMA CNC, code 5.0328, is supplied together with a trolley, which is what sets it apart from the base version. The CNC edition carries every signal needed for machine cutting, including an input for remote current control from the CNC table, and the same unit can still be used by hand. The plasma gas is air or nitrogen.
On carbon steel the maker gives a quality cut up to 45 mm, a productive cut up to 22 mm and separation of metal up to 50 mm, where edge requirements are lower. Carbon, high-alloy and stainless steels and non-ferrous metals are cut with plasma without special gases, at high speed, with a narrow heat-affected zone and small thermal distortion.
A proportional valve sets the working gas pressure precisely and shows it on the display, and it holds the set pressure and flow, which governs the accuracy and stability of the cut. The fan runs only when cooling is needed and switches off otherwise. Control is by an encoder with a push button. According to the series brochure, the SVAROG 105 PLASMA inverters recognise the torch that is connected and display the matching list of consumables.
The maker recommends the SVS-105 machine torch with a 9 m coaxial cable (code 6990-2+7103), and a 6.0 m extension (code 7088) takes the length up to 15 m. The starter kit for the 85 A machine SVS-105 is code 7195. SV-FIT torches can have their body changed to 15, 75 or 90 degrees and a handle up to 130 cm, so the same source also works with the hand SVH-105.
For compressed air preparation the kit includes a cyclone separator 7704, a 567 l microfilter 7707 with automatic condensate drain, and an AT 1000 filter (5302) with adapter 5304. The manual covers requirements for the air source, connection to a central supply, operation from a generator, cutting parameters and error codes. Electrical safety is checked to ČSN EN 60 971-1.
Technical specifications
| Brand | ALFA IN |
|---|---|
| Country of manufacture | Czech Republic |
| Type | plasma cutting power source for CNC and hand cutting |
| Supply | with trolley |
| Gas | air or nitrogen |
| Quality cut, carbon steel | up to 45 mm |
| Productive cut, carbon steel | up to 22 mm |
| Metal separation | up to 50 mm |
| Current control | remote from CNC table |
| Gas pressure control | proportional valve, display indication |
| Fan | on demand |
| Recommended torch | SVS-105 + 9 m cable (6990-2+7103) |
| Maximum cable length | 15 m |
| Starter kit | 7195 (SVS-105, 85A) |
Part numbers
Show all part numbers (1)
5.0328
Request a price and lead time
ALFA IN SVAROG 105 PLASMA CNC with trolley, CNC plasma source up to 45 mm. We reply within one business day.
Or email sales@usk.ua or call 044 339-50-20.
Questions and answers
What thickness does the SVAROG 105 PLASMA CNC cut?
Quality cuts in carbon steel to 45 mm, productive cuts to 22 mm, and separation of metal up to 50 mm.
How does the SVAROG 105 PLASMA CNC work with a CNC table?
The CNC edition has every signal needed for machine cutting, including remote current control from the table.
Which torch does the maker recommend for the SVAROG 105 PLASMA CNC?
The SVS-105 machine torch with a 9 m coaxial cable (code 6990-2+7103); with extension 7088 the length reaches 15 m.
Similar equipment from other manufacturers






