
ALFA IN PERUN 40 PLASMA PFC plasma cutter for 110–230V mains, cuts to 15 mm
The ALFA IN PERUN 40 PLASMA PFC is a compact plasma cutter with power factor correction for single-phase mains of 110 to 230V. It gives a clean cut of carbon steel up to 15 mm, productive cutting up to 10 mm and separation up to 20 mm, and it suits installation work, repairs and small workshops.
- Brand
- ALFA IN
- Country of manufacture
- Czech Republic
- Type
- plasma cutting power source for manual use
- Inverter
- IGBT PFC
Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.
Description
The PERUN 40 PLASMA PFC, article 5.0308, is the newest manual power source in the ALFA IN plasma range. Unlike the PEGAS inverters, it runs from single-phase mains: power factor correction (PFC) allows operation from a 110 V to 230 V supply with a tolerance of ±15%, which means an ordinary single-phase outlet. The unit comes with the HS-60 6 m torch and the 5085-1 starter set, and an earthing cable is included in the box.
For carbon steel the limits are a clean cut up to 15 mm, productive cutting up to 10 mm, and separation of the workpiece up to 20 mm where lower edge quality is acceptable. Practically any electrically conductive material can be cut, including carbon, high-alloy and stainless steels and non-ferrous metals, without special gases. A separate mode is needed for perforated sheet and for material with gaps.
PFC makes a practical difference here. Efficiency is higher, the mains circuit breaker in the panel carries a smaller load and trips later than with a unit lacking PFC, and the source is less sensitive to voltage dips and surges. It produces fewer electromagnetic disturbances and places only a minimal reactive current load on the mains.
The fan runs on demand and switches off completely when cooling is not needed. The controls are covered, the handle folds down out of the way and the unit is light. The front panel has LEDs for power-on, overheating, an air or torch fault and arc on, a pressure gauge, a current potentiometer, a switch for air setting, continuous cutting and cutting with gaps, and a central torch connector. Besides the HS-60, the manufacturer describes configurations with the SCP 60 and ABICUT 45 torches, and the 6 m ALFA IN torch set is listed under code 381.0001.1. A circle cutting guide, 5081 (SCP2550), is available for round holes. For compressed air the cyclone separator 7704 is used, along with the 7707 microfilter rated at 567 l, which drains condensate automatically, and the AT 1000 air filter (5302) with the 5304 adapter. The 3 m earthing cable, rated 200 A and 25 mm2, is listed under code VM0303. Routine servicing is carried out every six months to ČSN 331500 and ČSN 050630.
Technical specifications
| Brand | ALFA IN |
|---|---|
| Country of manufacture | Czech Republic |
| Type | plasma cutting power source for manual use |
| Inverter | IGBT PFC |
| Mains voltage | 110 V – 230 V, ±15% |
| Clean cut, carbon steel | up to 15 mm |
| Productive cutting, carbon steel | up to 10 mm |
| Metal separation | up to 20 mm |
| Torch included | HS-60 6 m |
| Starter set | 5085-1 |
| Earthing cable | included |
| Modes | continuous cutting, cutting with gaps, air setting |
| Fan | switches on as needed |
| Compatible torches | HS-60, SCP 60, ABICUT 45 |
Part numbers
Show all part numbers (1)
5.0308
Request a price and lead time
ALFA IN PERUN 40 PLASMA PFC plasma cutter for 110–230V mains, cuts to 15 mm. We reply within one business day.
Or email sales@usk.ua or call 044 339-50-20.
Questions and answers
Can the PERUN 40 PLASMA PFC run from a standard socket?
Yes, PFC allows connection to a single-phase mains supply of 110 V to 230 V with a tolerance of ±15%.
What thickness does the PERUN 40 PLASMA PFC cut?
Carbon steel: clean cut up to 15 mm, productive cutting up to 10 mm, and separation of the workpiece up to 20 mm.
Which torches suit the PERUN 40 PLASMA PFC?
The HS-60 6 m torch with the 5085-1 starter set comes in the kit; the manufacturer also describes operation with SCP 60 and ABICUT 45 torches.
Similar equipment from other manufacturers






