
TECNA TSW1500CAR capacitor discharge stud welder for car body repair, 1 kVA
The TECNA TSW1500CAR welds studs, threaded pins and other fixings onto thin sheet by discharging a capacitor bank. It joins ferrous and non-ferrous metals up to 8 mm ø in 2-3 ms, leaving paint and zinc on the reverse side of the sheet undamaged.
- Brand
- TECNA
- Country of manufacture
- Italy
- Series
- TSW
- Model
- TSW1500CAR
Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.
Description
The TECNA catalogue lists the TSW1500CAR as an Aluminium Spotter, but it works on the capacitor discharge principle rather than as a classic transformer spotter. A capacitor bank charges over a few seconds from a low current drawn from the mains, then releases its energy in a very short pulse of about 2-3 ms. That pulse welds elements of ferrous and non-ferrous metals up to 8 mm ø, so both steel and aluminium studs can be fixed.
The main reason for a body shop to choose this unit is that studs, threaded pins and other fixings can be welded to thin sheet with no change to the reverse side. A painted or galvanised surface on the opposite side of the weld stays intact, so the anti-corrosion layer inside the panel does not need restoring after repair.
A microprocessor controls the unit and compensates for fluctuations in the mains voltage, so each discharge carries the same energy from one weld to the next. LED indicators show operating modes and self-diagnostic results, so the operator does not have to hunt for the cause of a fault. The 8 mm ø figure refers to the diameter of the element being welded, not the thickness of the sheet. Cooling is by forced fan, and the unit has a protective device and fault protection.
The unit has a rated power of 1 kVA. The manufacturer's page does not describe how the TSW1500CAR differs from the senior model in the TSW series at the same rating, so the choice between them is best made against TECNA's documentation for the specific stud diameters. The unit is made in Italy.
Technical specifications
| Brand | TECNA |
|---|---|
| Country of manufacture | Italy |
| Series | TSW |
| Model | TSW1500CAR |
| Type | capacitor discharge stud welder (Aluminium Spotter) |
| Power | 1 kVA |
| Element diameter | up to 8 mm ø |
| Discharge duration | about 2-3 ms |
| Materials | ferrous and non-ferrous metals |
| Control | microprocessor, with mains fluctuation compensation |
| Indication | LED, diagnostics |
| Cooling | forced fan |
Part numbers
Show all part numbers (1)
TSW1500CAR
Request a price and lead time
TECNA TSW1500CAR capacitor discharge stud welder for car body repair, 1 kVA. We reply within one business day.
Or email sales@usk.ua or call 044 339-50-20.
Questions and answers
Which fixings can the TSW1500CAR weld?
Studs, threaded pins and other fixings of ferrous and non-ferrous metals up to 8 mm ø.
Is the paint on the reverse side of the sheet damaged?
No. According to the manufacturer, a painted or galvanised surface on the opposite side of the weld is left unchanged.
How fast is the weld?
The capacitor discharge lasts about 2-3 ms, and the bank charges over a few seconds.
Similar equipment from other manufacturers






