International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

TECNA 1320 AC resistance welding control unit in the SENSUM system

The TECNA 1320 is a control unit for AC resistance welding machines, operating within the SENSUM control system. It has built-in Ethernet with Modbus TCP/IP, a web interface and a 24 VDC supply. Industrial fieldbus interfaces and an input-output expansion board are available as options.

Brand
TECNA (Italy)
Model
1320
Type
AC resistance welding control unit
Control system
SENSUM

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

The TECNA 1320 belongs to the SENSUM control system and is intended for AC resistance welding machines. The maker lists it under both industrial resistance welding systems and measurement instruments, since it governs the process while also reading the welding signals for each spot. It is made by TECNA in Italy.

Communication runs through a built-in Ethernet port using the standard Modbus TCP/IP protocol. As an open industrial protocol, it lets the unit connect to a line controller, a data acquisition system or SCADA without separate gateways. Settings and data are viewed through a web interface, so a browser on a networked computer or panel is enough, with no dedicated handheld programming console.

The electronics run from a 24 VDC supply, a voltage common in automation cabinets, so the unit can share the supply that feeds the rest of the machine controls.

For integration into automated lines, optional industrial fieldbus interfaces are available, chosen to suit the plant network so the unit exchanges data with the line controller in the protocol it uses. A further option is an input-output expansion board, which adds digital and analogue inputs and outputs and handles the welding process sensor signals. Machine and part-feed signals are wired to the unit through it, and process sensors allow welding to be monitored point by point.

The maker's page for the 1320 does not state current, the number of stored programmes or control modes, so these must be confirmed against the specific welding machine. Matching the unit to a machine means checking the machine type, its transformer, the fieldbus required and the number of inputs and outputs needed.

Technical specifications

BrandTECNA (Italy)
Model1320
TypeAC resistance welding control unit
Control systemSENSUM
Interfacebuilt-in Ethernet, standard Modbus TCP/IP
User interfaceweb interface
Power supply24 VDC
Fieldbusindustrial, optional
Input-output expansion boardoption: digital and analogue inputs and outputs, welding process sensors

Request a price and lead time

TECNA 1320 AC resistance welding control unit in the SENSUM system. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

How does the TECNA 1320 connect to a line?

Through built-in Ethernet with Modbus TCP/IP, and optionally through industrial fieldbus interfaces.

What power supply does the unit need?

It runs from a 24 VDC supply.

Can inputs, outputs and sensors be added?

Yes. An optional expansion board adds digital and analogue inputs and outputs and handles welding process sensors.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides