
Kühtreiber ABR Plastic P1 plastic crack repair unit with reinforcing staples, 230 V
The Kühtreiber ABR Plastic P1 is a compact electric unit that repairs cracks in plastic parts with heated reinforcing staples. Weighing 8 kg and supplied in a plastic case, it suits body repair, machinery, plumbing, and servicing and installation work.
- Brand
- Kühtreiber
- Country of manufacture
- Czech Republic
- Supply voltage
- 1x 230 V ±15 %
- Frequency
- 50/60 Hz
Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.
Description
The ABR Plastic P1 from the Czech company Kühtreiber performs a single repair method: cracks in plastic parts are drawn together with specially shaped reinforcing staples. It has no hot-air torch and no compressor, unlike the senior ABR Plastic P2 Air. It is lighter at 8 kg and comes in a plastic case, which makes it easy to carry between a workshop, a plant and a job site.
The staple is placed into the openings of the built-in torch. Once heating is on, it warms quickly and the technician presses it into the damaged spot, where it lies across the crack and holds the edges together. The crack is then finished with special melting knives and the surface is smoothed to remove any unevenness. As the material cools, the joint becomes strong, flexible and durable and works together with the part.
The unit runs from a single-phase 1x 230 V ±15 %, 50/60 Hz supply with a 16 A mains fuse, and its input current does not exceed 2 A. The maximum load at 40 °C is 56 A on the melting knife and 6.5 A on the staple. The housing measures 280 x 175 x 130 mm and carries an IP 20 rating. The maker cites high power and efficiency for a unit of this small mass and size.
The starter kit contains staples of various shapes plus cutting and melting knives in straight and curved forms. Because the staples differ in shape, the right one is picked for a given crack, corner or edge. The unit is ready for work straight out of the box.
Kühtreiber positions the ABR Plastic P1 for body repair, machinery manufacture, plumbing, equipment servicing and installation. Repairing a plastic part on site avoids buying an expensive spare and reduces the plastic that goes to waste.
Technical specifications
| Brand | Kühtreiber |
|---|---|
| Country of manufacture | Czech Republic |
| Supply voltage | 1x 230 V ±15 % |
| Frequency | 50/60 Hz |
| Fuse | 16 A |
| Input current | max. 2 A |
| Max. load (40 °C), melting knife | 56 A |
| Max. load (40 °C), staple | 6.5 A |
| Protection rating | IP 20 |
| Source dimensions | 280 x 175 x 130 mm |
| Weight | 8 kg |
Part numbers
Show all part numbers (1)
07450004
Request a price and lead time
Kühtreiber ABR Plastic P1 plastic crack repair unit with reinforcing staples, 230 V. We reply within one business day.
Or email sales@usk.ua or call 044 339-50-20.
Questions and answers
Can the ABR Plastic P1 weld plastic with hot air?
No. The P1 has only a staple torch and repairs cracks by reinforcing them. A hot-air torch with a compressor is fitted to the ABR Plastic P2 Air.
What does the starter kit include?
Staples of various shapes, plus cutting and melting knives in straight and curved forms. The unit comes in a plastic case.
What power supply does the unit need?
A single-phase 1x 230 V ±15 %, 50/60 Hz supply with a 16 A fuse. The input current does not exceed 2 A.
Similar equipment from other manufacturers






