International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

Kühtreiber ABR Plastic P2 Air plastic repair unit with staples and hot air, 230 V

The Kühtreiber ABR Plastic P2 Air is a compact electric unit for repairing cracks and welding plastic parts. It carries a staple torch and a hot-air torch alongside a built-in compressor, and suits body repair, machinery manufacture and plumbing.

Brand
Kühtreiber
Country of manufacture
Czech Republic
Supply voltage
1x 230 V ±15 %
Frequency
50/60 Hz

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

The Czech maker Kühtreiber equips the ABR Plastic P2 Air with two built-in torches, one for shaped staples and one for hot-air welding. This sets it apart from the entry-level ABR Plastic P1, which has only the staple torch. A staple reinforces a crack in a plastic part, while hot air combined with filler plastic lets the user weld seams and fill holes.

The hot air is produced by a built-in compressor or drawn from an external gas source such as nitrogen. Flow from the internal inlet is 15 l/min and from the external inlet 12 to 20 l/min, with a maximum air temperature of 500 °C. The operator sets the heating temperature with a control knob, and light indicators show the state of the unit.

Staple repair works as follows: the staple is placed into the openings of the torch, and once heating is switched on it warms very quickly and is pressed into the damaged spot. The seam is then finished with special melting knives, straight or curved, and the surface is smoothed. Once the material cools, the joint is strong, flexible and durable.

The unit runs from a single-phase 1x 230 V ±15 %, 50/60 Hz supply with a 16 A mains fuse, and its input current does not exceed 3 A. The maximum load at 40 °C is 75 A on the melting knife and 12 A on the staple. The housing measures 280 x 175 x 130 mm, carries an IP 20 rating and weighs 15 kg. The compressor, staple torch and hot-air torch sit in a single housing, and the maker cites high power and efficiency for the unit.

The starter set includes staples of various shapes, cutting and melting knives in straight and curved forms, PP/PE/ABS filler strips, a curved gas nozzle and a staple holder. Kühtreiber positions the unit for body repair, machinery and plumbing work. A repaired part can replace the purchase of an expensive spare, and less plastic ends up as waste.

Technical specifications

BrandKühtreiber
Country of manufactureCzech Republic
Supply voltage1x 230 V ±15 %
Frequency50/60 Hz
Fuse16 A
Input currentmax. 3 A
Max. load (40 °C), melting knife75 A
Max. load (40 °C), staple12 A
Max. air temperature500 °C
Air flow, internal inlet15 l/min
Air flow, external inlet12 – 20 l/min
Protection ratingIP 20
Source dimensions280 x 175 x 130 mm
Weight15 kg

Part numbers

Show all part numbers (1)

07450001

Request a price and lead time

Kühtreiber ABR Plastic P2 Air plastic repair unit with staples and hot air, 230 V. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

How does the ABR Plastic P2 Air differ from the ABR Plastic P1?

The P2 Air has a hot-air torch and a built-in compressor, so it can weld plastic with filler strips and fill holes. The P1 works only with staples.

Can external gas replace the compressor?

Yes. The unit accepts external gas, such as nitrogen, at 12 to 20 l/min. The built-in compressor delivers 15 l/min.

What power supply does the unit need?

A single-phase 1x 230 V ±15 %, 50/60 Hz supply with a 16 A fuse. The input current does not exceed 3 A.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides