
TECNA TE801 weld control unit, 250 programmes, 200-480 Vac supply, RS485 and CAN
The TECNA TE801 drives the controlled diodes of a resistance welding machine and sets the welding current. It runs on supply networks from 200 to 480 Vac, stores 250 programmes and links to a PLC or PC over RS485 or CAN.
- Brand
- TECNA
- Country of manufacture
- Italy
- Model
- TE801
- Type
- microprocessor resistance welding control unit
Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.
Description
The TE801 is a microprocessor unit for resistance welding machines, and it differs from simpler controllers mainly in memory capacity and networking. It holds up to 250 welding programmes, and 127 of them can be recalled directly from an external device. Each programme carries up to 16 adjustable parameters that define the welding cycle. The supply range runs from 200 Vac to 480 Vac, plus or minus 10 per cent, so one model suits machines built for different mains voltages.
Its main job is to switch the controlled diodes that regulate the welding current, working synchronously with phase control. Two operating modes are available: standard power regulation and constant current. Beyond the basic cycle, the controller supports pre-weld and post-weld current, slope and pulse functions, and it sets the welding time in half-cycles. The unit runs single cycles, and a WELD/NO-WELD function lets you test the machine without welding.
For quality control the TE801 measures the RMS weld current in kA together with the relative conduction angle. The built-in ammeter covers two ranges, 40 kA and 90 kA. Limits can be set on either current or conduction angle, and when a reading falls outside them the unit raises a warning. End-of-cycle and ready outputs make it simple to pass signals to automation. A stepper function with a programmable curve compensates for electrode wear.
Communication with a higher-level system runs over an isolated RS485 serial link or CAN, both using the TECNA protocol. One PLC or PC can control up to 31 devices on a single network, so several machines in a workshop can be programmed and monitored from one place. A Fieldbus card and Ethernet are offered as options, and firmware is updated through dedicated software.
Technical specifications
| Brand | TECNA |
|---|---|
| Country of manufacture | Italy |
| Model | TE801 |
| Type | microprocessor resistance welding control unit |
| Current control | synchronous, controlled diodes with phase control |
| Supply range | from 200 Vac to 480 Vac +/- 10% |
| Welding programmes | 250, of which 127 can be recalled from an external device |
| Parameters per programme | up to 16 |
| Cycle functions | slope, pulses, pre-weld and post-weld functions, welding time in half-cycles |
| Operating modes | 2: standard and constant current |
| Measurement | RMS weld current in kA and conduction angle |
| Ammeter | built in, 2 ranges (40, 90 kA) |
| Control limits | by current or conduction angle |
| Outputs | end of cycle, ready, warning when the point is outside the limits |
| Stepper function | with programmable curve |
| Cycle | single, WELD/NO-WELD |
| First switch-on delay | adjustable |
| Mains frequency | 50/60 Hz, self-adjusting |
| Interfaces | isolated RS485, CAN with TECNA protocol |
| Network | up to 31 devices under one PLC or PC |
| Options | Fieldbus and Ethernet |
| Firmware | updated through dedicated software |
Request a price and lead time
TECNA TE801 weld control unit, 250 programmes, 200-480 Vac supply, RS485 and CAN. We reply within one business day.
Or email sales@usk.ua or call 044 339-50-20.
Questions and answers
What supply voltage does the TECNA TE801 run on?
It covers 200 Vac to 480 Vac, plus or minus 10%, and it sets itself automatically to the 50/60 Hz mains frequency.
How many programmes does the TE801 store?
Up to 250 programmes with up to 16 parameters each, and 127 of them can be recalled directly from an external device.
How many machines can be networked with the TE801?
Over RS485 or CAN, up to 31 devices can run under one PLC or PC.
Similar equipment from other manufacturers






