
TECNA TE553 microprocessor control unit for three-phase DC resistance welders
The TECNA TE553 is a microprocessor control unit for three-phase direct-current resistance welding machines, covering spot, projection and seam types. It sets current by phase control through controlled diodes and stores 250 programmes, 31 of which can be recalled from outside the unit. Optional ports are RS232 or RS485.
- Brand
- TECNA (Italy)
- Model
- TE553
- Type
- microprocessor welding control unit
- Machines
- three-phase DC: spot, projection, seam
Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.
Description
The TE553 from TECNA of Italy is made for three-phase resistance welders that run on direct current. It manages the machine's assemblies, first of all the controlled diodes that set the welding current. Control is synchronous and the current is adjusted by phase control. The unit is fitted to spot, projection and seam machines. There are two operating modes: a standard mode with power adjustment, and a constant energy mode available as an option.
Memory holds 250 welding programmes, and 31 of them can be recalled directly from an external device such as a line controller. Each programme carries up to 25 parameters. Apart from the usual four-stage cycle, the unit runs pre-weld and post-weld current, slope and pulses, with weld time set in half-cycles of the mains. It also includes first-insertion delay adjustment, double-stroke operation, single and automatic cycles, and WELD and NO-WELD functions.
The display shows the measured effective welding current in kA, and current limits can be set. Electrode wear is compensated by a stepper function that follows a programmable curve. As an option, the unit can switch on and monitor electrode dressing.
Programming uses six keys and a backlit alphanumeric LCD. The unit drives 5 solenoid valves rated 24 VDC at up to 5 W through a self-protected output, and it provides an output for a proportional valve and a key for choosing foot or two-hand control. It self-adjusts to 50/60 Hz mains. For automatic machines, the number of inputs and outputs can be increased.
Data exchange uses optional isolated RS232 or RS485 ports, and the firmware can be upgraded with suitable software. Menus are offered in several languages, including Italian, English, French, German and Spanish. When selecting a TE553, establish the machine type, the three-phase direct-current supply arrangement, whether constant energy and electrode dressing are needed, and which port, RS232 or RS485, the line uses.
Technical specifications
| Brand | TECNA (Italy) |
|---|---|
| Model | TE553 |
| Type | microprocessor welding control unit |
| Machines | three-phase DC: spot, projection, seam |
| Current control | synchronous, phase control, via controlled diodes |
| Welding programmes | 250, of which 31 recalled externally |
| Parameters per programme | up to 25 |
| Modes | standard, constant energy (option) |
| Measurement | effective welding current in kA |
| Solenoid valves | 5, 24 VDC, max. 5 W |
| Mains frequency | 50/60 Hz, self-adjusting |
| Communication | isolated RS232 or RS485, optional |
| Programming | 6 keys, backlit LCD |
| Options | constant energy, electrode dressing |
Request a price and lead time
TECNA TE553 microprocessor control unit for three-phase DC resistance welders. We reply within one business day.
Or email sales@usk.ua or call 044 339-50-20.
Questions and answers
Which welding machines is the TECNA TE553 built for?
Three-phase direct-current resistance welders, including spot, projection and seam types.
How many programmes can it store?
250 programmes of up to 25 parameters each, and 31 can be recalled from an external device.
What communication ports are available?
Optional isolated RS232 or RS485 ports, and the firmware can be upgraded with suitable software.
Similar equipment from other manufacturers






