International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

TECNA TE300 control unit for suspended welding guns, 2 programmes, 11 parameters

The TECNA TE300 controls suspended resistance welding guns in a basic configuration with 2 programmes, 11 parameters and automatic double stroke. It is set with 5 buttons and drives the thyristors and two valves of the machine.

Brand
TECNA
Country of manufacture
Italy
Model
TE300
Type
microprocessor control unit for suspended resistance welding guns

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

The TE300 is the simplest of the suspended-gun controllers from TECNA. It holds only 2 welding programmes, chosen by an external device, and each programme has 11 programmable parameters. For guns where the operator switches between two settings, this is enough, and setup is quick because programming is reduced to 5 buttons.

It is a microprocessor unit with functions made for suspended guns. Double stroke is carried out automatically, and the unit checks that the safety devices fitted on the handle operate. The thyristors are driven synchronously with phase-shift control to regulate the welding current, and the unit detects the 50/60 Hz mains frequency by itself.

The cycle can be a simple four-time sequence, or it can add pre-weld current, slope and pulses. The unit runs a single cycle or an automatic one, and a WELD/NO WELD function checks the machine without welding. Compensation of the minimum current, or of the secondary current, helps with welding oxidised sheets and rods. A first phase-shift delay can be adjusted so that the machine draws a better-balanced load from the mains.

Two solenoid valves rated 24 Vdc 7.2 W Max are driven, with outputs protected against short circuit: one for closing the electrodes and one for double stroke. Timing parameters fall within the ranges given by the maker: first squeeze 00 to 99 periods, squeeze 01 to 99 periods, pre-weld time 00 to 60 periods, pre-weld current 01 to 99 per cent, cold time 00 to 50 periods, slope 00 to 29 periods, weld time up to 60 periods, current up to 99 per cent, impulse count 01 to 09, hold time 01 to 99 periods and off time 00 to 99 periods.

Technical specifications

BrandTECNA
Country of manufactureItaly
ModelTE300
Typemicroprocessor control unit for suspended resistance welding guns
Current controlsynchronous thyristor drive with phase-shift control
Welding programmes2, selected by an external device
Programme parameters11
Cyclesimple four-time cycle, pre-weld current, slope, pulses
Compensationminimum current; secondary current for oxidised sheets and rods
Double strokeautomatic
Cycle modesingle and automatic, WELD/NO WELD
Solenoid valves2, 24 Vdc 7.2 W Max, output protected against short circuit
Programming5 buttons
Mains frequency50/60 Hz, self-adjusting
First squeeze (1° SQUEEZE)00 to 99 periods
Squeeze (SQUEEZE)01 to 99 periods
Pre-weld time (PRE-WELD TIME)00 to 60 periods
Pre-weld current (PRE-WELD CURRENT)01 to 99 %
Cold time (COLD TIME)00 to 50 periods
Slope (SLOPE)00 to 29 periods
Weld time (WELD TIME)up to 60 periods
Current (CURRENT)up to 99 %
Impulse count (IMPULSE N.)01 to 09
Hold time (HOLD TIME)01 to 99 periods
Off time (OFF TIME)00 to 99 periods

Request a price and lead time

TECNA TE300 control unit for suspended welding guns, 2 programmes, 11 parameters. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

How many programmes does the TECNA TE300 hold?

Two programmes of 11 parameters each, with the programme chosen by an external device.

Can the TE300 weld oxidised sheet?

Yes, compensation of the secondary current helps when welding oxidised sheets and rods.

What is the maximum weld time on the TE300?

The weld time is set up to 60 periods, the current up to 99 per cent, and the impulse count from 01 to 09.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides