International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

TECNA TE1700C portable WELD TESTER analyser for AC, DC, MFDC and CDW machines

The TECNA TE1700C WELD TESTER measures welding current, voltage, electrode force, energy and resistance on resistance welding machines. It is a portable analyser with a 5.7 inch colour touch screen, powered by rechargeable batteries, used for commissioning, quality control and fault diagnosis.

Brand
TECNA
Country of manufacture
Italy
Model
TE1700C (WELD TESTER)
Type
portable weld parameter analyser

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

The TE1700C from TECNA works with AC, DC and mid-frequency DC (MFDC) resistance welding machines, as well as capacitor discharge (CDW) machines. A single instrument, equipped with different transducers, measures the current in the welding circuit, the force on the electrodes, the voltage across the electrodes, the energy, the resistance and the heat current. Waveforms of selected signals are drawn on a 5.7 inch colour touch LCD, so the analyser serves as both a diagnostic tool and a setup aid.

Current and voltage are reported as RMS values and as maximum positive and negative peaks. On AC machines the instrument determines the conduction angle in degrees. Weld time is measured in periods with 1/2 period resolution, or in milliseconds with 0.1 ms resolution, and the longest measurement lasts 6 seconds. The energy delivered during the weld and the electrical resistance of the material are calculated separately. Programmes with several pulses are analysed for up to 9 pulses.

A start and end blanking function, with a programmable duration, masks the rising and falling edges of the current. The same function removes errors caused by a strong electrode impact and leaves that impact available for analysis. Electrode force is shown as the maximum and minimum average values at the beginning and at the end of the weld time.

The instrument stores up to 30,000 measurements, with statistics and details of the last 100 measurements kept on the device itself. 16 tolerance masks can be stored and called through external inputs, and the result of each check is passed to an external output in WELD MONITOR mode. Limits can be set on time, current, power or force. A built-in clock stamps each measurement with its date and time, and the screen shows tables of welding settings.

Settings and results can be viewed from a smartphone, tablet or PC over Ethernet or Wi-Fi. Data and waveforms are saved to a memory stick through the USB 2.0 port in bitmap and csv formats, and firmware is updated from the same stick. Transducers are recognised automatically, and TECNA offers a wide choice of them. The instrument runs on rechargeable Ni-MH batteries, and the charger is included. Battery life is about 10 hours depending on use, and the instrument and accessories travel in a case.

Technical specifications

BrandTECNA
Country of manufactureItaly
ModelTE1700C (WELD TESTER)
Typeportable weld parameter analyser
Compatible machinesAC, DC / MFDC, CDW
Current measurementRMS, maximum positive and negative peak
Voltage measurementRMS, maximum positive and negative peak
Conduction anglein degrees, for AC machines
Weld timein periods with 1/2 period resolution, or in ms with 0.1 ms resolution, maximum 6 s
Other quantitieselectrode force, energy, resistance, heat current
Pulsesup to 9
Blanking functionat start and end, duration programmable
Memoryup to 30,000 measurements, statistics, details of the last 100 measurements
Tolerance masks16, called through external inputs, WELD MONITOR output
InterfacesEthernet, Wi-Fi, USB 2.0 (bitmap, csv)
Display5.7 inch colour touch LCD
Powerrechargeable Ni-MH batteries, charger included, about 10 hours of operation
Firmware updatefrom memory stick
Supplied incase for the instrument and accessories

Request a price and lead time

TECNA TE1700C portable WELD TESTER analyser for AC, DC, MFDC and CDW machines. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

Which machines does the TECNA TE1700C suit?

The instrument measures on AC, DC and MFDC machines, and on capacitor discharge CDW machines.

Which quantities does the TE1700C measure besides current?

Electrode voltage, force, energy, material resistance, heat current and weld time, and conduction angle on AC machines. Programmes with several pulses are analysed for up to 9 pulses.

How are results exported from the TE1700C?

To a memory stick through USB 2.0 in bitmap or csv formats, or over Ethernet and Wi-Fi to a smartphone, tablet or PC. The instrument holds up to 30,000 measurements.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides