
TECNA TE1600 WELD TESTER portable meter for welding current and electrode force
The TECNA TE1600 WELD TESTER measures the welding current and electrode force of resistance welding machines. It works with AC, DC and capacitor discharge machines, and the connected transducer is recognised automatically.
- Brand
- TECNA
- Country of manufacture
- Italy
- Model
- TE1600 WELD TESTER
- Type
- portable instrument for resistance welding parameters
Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.
Description
Unlike the controllers in the range, the TECNA TE1600 WELD TESTER is not built into the machine. It is a portable instrument for measuring the parameters of resistance welding. With different transducers the same instrument measures both the welding current and the force applied through the electrodes. Its computing section is built around a 32-bit microprocessor with a 12-bit analogue-to-digital converter.
The TE1600 measures on standard AC machines, on three-phase rectified and medium frequency DC machines, and on capacitor discharge machines (CDW). On AC it displays RMS, maximum and average current values, peak values, the maximum positive and negative values, and the conduction angle in degrees, together with the weld time in periods in steps of half a period. On DC it measures average and maximum values and the weld time in milliseconds. On CDW it shows the peak value and the weld time.
A blanking function, with a programmable interval before and after the pulse, removes measurement errors caused by the rise of current, and it helps check that the first phase-shift delay is set correctly. Values measured on the last welds are kept in the instrument's memory. Electrode force is shown as three figures: the maximum value, and the values at the start and at the end of the weld time. A separate blanking function removes the errors caused by the large impact force when electrodes close, so that this force can still be assessed.
Many transducers are available for the instrument, and the connected one is recognised automatically. A BNC output sends the current waveform to an oscilloscope. The instrument runs on four 1.5 V AA alkaline batteries, so it can be used right beside the machine without a mains connection. It suits quality and commissioning staff who check the settings of spot and projection welding machines of various types.
Technical specifications
| Brand | TECNA |
|---|---|
| Country of manufacture | Italy |
| Model | TE1600 WELD TESTER |
| Type | portable instrument for resistance welding parameters |
| Measured quantities | welding current, electrode force |
| Processor | 32-bit microprocessor, 12-bit A/D converter |
| Machine types | AC; DC with three-phase rectification and medium frequency; CDW capacitor discharge |
| AC | RMS, maximum and average values, peak positive and negative values, conduction angle in degrees, time in periods in steps of half a period |
| DC | average and maximum values, weld time in ms |
| CDW | peak value and weld time |
| Electrode force | maximum, and at the start and end of the weld time |
| Blanking | before and after the pulse with programmable interval; for impact force |
| Memory | values of the last welds |
| Transducers | recognised automatically |
| Output | BNC for oscilloscope |
| Power | alkaline batteries 4 x 1.5 V (AA) |
Request a price and lead time
TECNA TE1600 WELD TESTER portable meter for welding current and electrode force. We reply within one business day.
Or email sales@usk.ua or call 044 339-50-20.
Questions and answers
What does the TECNA TE1600 measure?
Welding current and electrode force, depending on the connected transducer, which the instrument recognises automatically.
Which machines does the TE1600 work with?
AC machines, DC machines with three-phase rectification and medium frequency, and capacitor discharge CDW machines.
What powers the TE1600?
Four 1.5 V AA alkaline batteries.
Similar equipment from other manufacturers






