
TECNA TE101 weld control unit for single-phase machines, 99 programmes, 18-56 kA ammeter
The TECNA TE101 controls single-phase resistance welding machines with manual or pneumatic drive and automatic welding systems. Its built-in ammeter and current limits make setting up and checking weld quality straightforward.
- Brand
- TECNA
- Country of manufacture
- Italy
- Model
- TE101
- Type
- microprocessor welding control unit for single-phase resistance welders
Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.
Description
The TE101 is a microprocessor controller designed for single-phase resistance welding machines. It can be fitted to manual machines with a manual or pneumatic drive, and it also serves automatic welding systems. Its memory holds 99 welding programmes, which can be selected from outside through inputs for 31 programmes, or 15 programmes with parity control.
Welding current is set by a synchronous thyristor drive that uses phase-shift control. Weld times are entered in half-periods, and the cycle can include pre-weld, slope and pulse functions. The unit runs in single or repeat mode, and a WELD/NO WELD function lets you check the machine without welding. Two independent cycle-start devices can be connected, each calling a different programme.
A built-in RMS ammeter reads current on two ranges, 18-56 kA. Current limits can be set, and if the value leaves them, the unit sends an error signal and can stop the machine. For work on oxidised sheet and rod, a compensation function helps with welding. Other adjustments include a first phase-shift delay, which balances the line current of the machine, and a cos phi setting that improves the linearity of current regulation.
For automation, the TE101 provides an end-of-cycle output and an input for thermostatic protection. It adjusts itself to a 50/60 Hz mains frequency. It drives a 24 Vdc solenoid valve of up to 7.2 W, protected against short circuits. An optional isolated RS 232 interface connects it to a printer or personal computer for recording production data.
Technical specifications
| Brand | TECNA |
|---|---|
| Country of manufacture | Italy |
| Model | TE101 |
| Type | microprocessor welding control unit for single-phase resistance welders |
| Application | manual machines with manual or pneumatic drive, automatic systems |
| Current control | synchronous thyristor drive with phase-shift control |
| Ammeter | built in, RMS, 2 ranges (18-56 kA) |
| Welding programmes | 99 |
| External programme selection | 31 programmes, or 15 programmes with parity control |
| Welding time | in half-periods |
| Cycle functions | pre-weld, slope and pulse |
| Current control limits | error signal output, machine stop |
| Operating modes | single and repeat cycle, WELD/NO WELD |
| Current compensation | for oxidised sheets and rods |
| Cycle start | 2 independent start devices with different programmes |
| Other functions | autoretain disabling, first phase-shift delay, cos phi adjustment |
| Outputs and inputs | end of cycle, thermostatic protection input |
| Mains frequency | 50/60 Hz, self-adjusting |
| Solenoid valve | 24 Vdc 7.2 W max, short-circuit protection |
| Option | isolated RS 232 interface for printer or PC |
Request a price and lead time
TECNA TE101 weld control unit for single-phase machines, 99 programmes, 18-56 kA ammeter. We reply within one business day.
Or email sales@usk.ua or call 044 339-50-20.
Questions and answers
Which machines is the TECNA TE101 fitted to?
Single-phase resistance welding machines with a manual or pneumatic drive, and automatic welding systems.
What current range does the TE101 measure?
The built-in RMS ammeter works on two ranges, 18-56 kA.
Can the TE101 weld oxidised metal?
Yes, its current compensation function helps when welding oxidised sheets and rods.
Similar equipment from other manufacturers






