
TECNA Light MFDC 90 kVA transformer for robot welding guns, 6 kA
The TECNA Light is a 90 kVA medium frequency transformer fitted to robot spot welding guns. Its lighter 16 kg housing suits heavy duty and automotive production, delivering a welding current of up to 6 kA with water cooling.
- Brand
- TECNA
- Country of manufacture
- Italy
- Type
- Inverter MFDC transformer for robot welding guns
- Power
- 90 kVA
Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.
Description
The Light belongs to the newer generation of transformers from this Italian maker for robot guns. Within the MFDC 90 kVA range its lighter 16 kg housing lowers the load on the robot flange and leaves more payload margin for the gun, cables and hoses. The no-load secondary voltage is 9.1 V and the maximum welding current is 6 kA.
Continuous thermal power in S1P mode is 63.6 kVA, a figure that indicates the duty the unit can sustain during a spot welding cycle. The 6 kA current is quoted for a cooling water flow of 4 l/min, so the robot's cooling circuit has to be designed around that rate. Water is connected through G1/4″ fittings.
MFDC means the inverter feeds the primary winding at a raised frequency, while the secondary current is rectified. The primary side runs at 500 V and 1000 Hz in the 400 V version and at 635 V and 1000 Hz in the 480 V version. Working at high frequency allows a smaller and lighter magnetic core than a mains frequency transformer, and the direct secondary current gives a more even heat in the weld zone.
Two versions are available: part number 4000013409 for a 400 V/50 Hz supply and 4000013411 for 480 V/60 Hz. The mains parameters of the plant and the inverter type should be confirmed before ordering. Power enters through a ROBIFIX-TAE1-57 connector and control signals through an M23 connector, so the transformer can be removed for servicing without re-routing the terminal cables.
Typical use is on robot lines for automotive production and other heavy serial processes in which a robot performs spot welding.
Technical specifications
| Brand | TECNA |
|---|---|
| Country of manufacture | Italy |
| Type | Inverter MFDC transformer for robot welding guns |
| Power | 90 kVA |
| Power supply | MFDC (Medium Frequency DC) |
| No-load secondary voltage | 9.1 V |
| Continuous rating (S1P) | 63.6 kVA |
| Maximum welding current | 6 kA at 4 l/min cooling flow |
| Mains voltage | 400 V/50 Hz or 480 V/60 Hz |
| Primary side | 500 V/1000 Hz (400 V version), 635 V/1000 Hz (480 V version) |
| Cooling | Water, G1/4″ connections |
| Connectors | Power ROBIFIX-TAE1-57, signal M23 |
| Weight | 16 kg |
Part numbers
Show all part numbers (2)
4000013409, 4000013411
Request a price and lead time
TECNA Light MFDC 90 kVA transformer for robot welding guns, 6 kA. We reply within one business day.
Or email sales@usk.ua or call 044 339-50-20.
Questions and answers
Which mains supply does the transformer need?
It comes in two versions: 4000013409 for 400 V/50 Hz and 4000013411 for 480 V/60 Hz.
What current and continuous power does the TECNA Light deliver?
A maximum welding current of 6 kA, a continuous thermal power of 63.6 kVA in S1P mode and a no-load secondary voltage of 9.1 V.
What cooling does it need?
Water cooling through G1/4″ connections; the 6 kA current is quoted for a water flow of 4 l/min.
Similar equipment from other manufacturers






