
TECNA J-ROBOT-39201 single-phase welding transformer 60 kVA
The TECNA J-ROBOT-39201 is a 60 kVA single-phase transformer for welding guns mounted on robots. It is liquid cooled, has epoxy resin cast windings and is made in Italy. The unit conforms to ISO 5826, ISO 10656 and ISO 22829.
- Brand
- TECNA
- Country of manufacture
- Italy
- Model (code)
- J-ROBOT-39201
- Type
- single-phase welding transformer for resistance welding
Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.
Description
The J-ROBOT-39201 is rated at 60 kVA, which is more than the lighter robotic models in the series. The J-ROBOT prefix marks it as a unit for robotic welding. It is picked when a spot needs more current than the light models can give, while the mass of the unit on the robot arm still matters. The technology is single-phase alternating current, like the whole TECNA single-phase line up to 400 kVA.
The transformer on robot tongs moves together with the arm, so mass, mounting and the routing of the cooling hoses matter for the J-ROBOT-39201. The 60 kVA rating sets the current the tongs can deliver at a given reach. A robotic cycle is short and frequent, so the coolant loop removes heat from the windings between welds.
Its construction follows the usual TECNA pattern, with liquid cooling and an epoxy resin body. The coolant carries heat from the windings and the secondary turn, while the resin keeps out moisture, dust and vibration from the machine. The coolant loop must be connected with the required flow before installation.
TECNA states that its transformers are built to ISO 5826, ISO 10656 and ISO 22829. The single-phase alternating current range runs to 400 kVA, the three-phase direct current range to 1500 kVA and the inverter direct current range to 664 kVA. The company also builds special transformers for particular applications, all made in Italy.
The welding current is set by a phase-control unit with thyristors, and the transformer steps the mains voltage down to the secondary level while raising the current. To select the J-ROBOT-39201, TECNA needs the mains voltage, the primary and secondary voltages, the dimensions and mass of the unit and the type of machine. The code alone gives only the 60 kVA rating, so the other specifications are confirmed against the code. For a replacement, send a photo of the old nameplate.
Technical specifications
| Brand | TECNA |
|---|---|
| Country of manufacture | Italy |
| Model (code) | J-ROBOT-39201 |
| Type | single-phase welding transformer for resistance welding |
| Power | 60 kVA |
| Technology | single-phase, alternating current |
| Cooling | liquid |
| Winding insulation | epoxy resin cast |
| Standards | ISO 5826, ISO 10656, ISO 22829 |
| Applications | resistance welding machines, heating, upsetting |
Request a price and lead time
TECNA J-ROBOT-39201 single-phase welding transformer 60 kVA. We reply within one business day.
Or email sales@usk.ua or call 044 339-50-20.
Questions and answers
What is the power rating of the TECNA J-ROBOT-39201?
The manufacturer gives the J-ROBOT-39201 a rating of 60 kVA on a single-phase alternating current supply. TECNA confirms the primary and secondary voltages against the model code.
Does the J-ROBOT-39201 need separate cooling?
Yes, every TECNA transformer is liquid cooled, so the unit must be connected to a coolant circuit with the required flow.
What does the J-ROBOT prefix indicate?
The prefix places the model among units for robotic welding. Compatibility with a specific gun and robot is agreed with TECNA against the J-ROBOT-39201 code.
Similar equipment from other manufacturers






